21064

Purge/Trap J BTEXTRAP^™

for use with Tekmar^® Velocity XPT, LSC-1, LSC-2, LSC-2000, 4000 (Straight, 12 in./30.5 cm, Swagelok fitting), HT-3

• Synonim(y): BTEX PURGE TRAP J, Tekmar^®
• Kod UNSPSC: 23151817

Właściwości

• Zastosowanie: environmental
• kompatybilność: for use with Tekmar^® Velocity XPT, LSC-1, LSC-2, LSC-2000, 4000 (Straight, 12 in./30.5 cm, Swagelok fitting), HT-3

Opis

Opis ogólny

Tubes used in purge and trap analyses generally are packed with multiple beds of adsorbent materials, so that a broad range of polar and nonpolar, high and low molecular weight compounds can be trapped in a single tube. Each bed protects the next, increasingly active bed, by preventing compounds from being held so strongly that they cannot be desorbed quickly without decomposition. During the purge phase of sampling, lower molecular weight compounds pass through the initial adsorbent beds, but are trapped by succeeding beds. During desorption, the carrier gas passes through the trap in the reverse direction of purge flow, so that higher molecular weight compounds never come in contact with the stronger (innermost) adsorbents.

Informacje prawne

BTEXTRAP is a trademark of Sigma-Aldrich Co. LLC

Tekmar is a registered trademark of Tekmar Co.

This page may contain text that has been machine translated.

Informacja o środkach bezpieczeństwa

• Kod klasy składowania: 11 - Combustible Solids
• Klasa zagrożenia wodnego (WGK): WGK 1
• Temperatura zapłonu (°F): Not applicable
• Temperatura zapłonu (°C): Not applicable