649821

PEDOT

tetramethacrylate end-capped solution, 0.5 wt. % (dispersion in nitromethane), contains p-toluenesulfonate as dopant

• Synonim(y): Oligotron^™ NM, PEDOT, PEDOT, tetramethacrylate end-capped
• Numer MDL: MFCD06798809
• Kod UNSPSC: 12352103
• NACRES: NA.23

Właściwości

• product name: Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution, 0.5 wt. % (dispersion in nitromethane), contains p-toluenesulfonate as dopant
• masa cząsteczkowa: ~1,360-1,600 g/mol (methacrylate equivalent weight); average M_n ~6,000
• zawiera: p-toluenesulfonate as dopant
• skład: ethanol, 5.8 wt. % ; isopropanol, 0.3 wt. % ; nitromethane, 93.4 wt. % ; Oligotron^™ tetramethacrylate, 0.5 wt. %
• stężenie: 0.5 wt. % (dispersion in nitromethane)
• opór: 1-10 M Ω/sq (surface resistance of film)
• przewodność: 0.1-0.5 S/cm (bulk)
• gęstość: 1.127 g/mL at 25 °C

Opis

Opis ogólny

Please follow this link for Aedotron/Oligotron selection guide table.

Zastosowanie

For best results, agitate for 20 minutes prior to use. Spin coat as-is at 500 RPM for 9 seconds followed by 1500 RPM for 15 seconds. Photocurable inks can be formulated by adding acrylate monomers and photoinitiators (i.e.DMPA) to the nitromethane dispersion. The solvent must be evaporated prior to crosslinking. Functional compounds can be coupled to the oligomer via reactions at the methacrylate group.

Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution (PEDOT-TMA) can be used as a hole injection layer (HIL) which can be used in optoelectronic applications such as light emitting diodes (LEDs), biosensors, and energy storage devices.

Suitable for spin coating applications.

Used for depositing thin films of conducting EDOT oligomers for sensors, antistatic layers, organic solar cells and flexible electronics.

Cechy i korzyści

End-capped structure renders the conducting oligomer PEDOT dispersible. The methacrylate groups offer the potential for crosslinking, or additional chemical functionalization. Nitromethane has a suitable volatility for spin coating applications.

Przestroga

Store this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.

Informacje prawne

Oligotron is a trademark of TDA Research, Inc.

This page may contain text that has been machine translated.

Informacja o środkach bezpieczeństwa

• Piktogramy: GHS02,GHS08,GHS07
• Hasło ostrzegawcze: Warning
• Zwroty wskazujące rodzaj zagrożenia: H226,H302 + H332,H351,H361d
• Zwroty wskazujące środki ostrożności: P202 - P210 - P233 - P301 + P312 - P304 + P340 + P312 - P308 + P313
• Klasyfikacja zagrożeń: Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Carc. 2 - Flam. Liq. 3 - Repr. 2
• Kod klasy składowania: 3 - Flammable liquids
• Klasa zagrożenia wodnego (WGK): WGK 2
• Temperatura zapłonu (°F): 96.8 °F - closed cup
• Temperatura zapłonu (°C): 36 °C - closed cup
• Środki ochrony indywidualnej: Eyeshields, Faceshields, Gloves, type ABEK (EN14387) respirator filter