923567

Nano Silver inkjet ink

photonically curable, low resistivity

• Sinônimo(s): Ag NP-based ink, Silver (Ag) Nanoparticle Ink, Silver nano ink, Smart′Ink S-CS01520
• Fórmula empírica (Notação de Hill): Ag
• Peso molecular: 107.87
• Código UNSPSC: 12352103
• NACRES: NA.23

Propriedades

• Nível de qualidade: 100
• forma: liquid
• composição: alcohol / glycol mixture (solvent)
• concentração: 20 wt. % Ag; 20 wt. %±1% (Silver content)
• resistividade: 5-10 μΩ-cm, after curing by photonic curing for less than 100ms, 3.2 - 6.3 Nb bulk silver; 5.4 μΩ-cm, after curing in furnace at 200° C for 5 minutes, 3.4 Nb bulk silver; 5.8 μΩ-cm, after curing in furnace at 180° C for 5 minutes, 3.6 Nb bulk silver; 6-12 μΩ-cm, after curing by NIR for a few seconds, 3.8 - 7.5 Nb bulk silver; 6.6 μΩ-cm, after curing in furnace at 150° C for 5 minutes, 4.1 Nb bulk silver
• resistência de folha: 13.5 m Ω/sq, 25 mum after curing at 200 Celsius for 5 min on glass; 16.5 m Ω/sq, 25 mum after curing at 150 Celsius for 5 min on glass
• cor: brown, Brown to Very Dark Brown and Faint Grey to Very Dark Grey and Black
• tensão superficial: 24 mN/m±3 mN/m
• viscosidade: 12 mPa.s±3%(20 °C) (@100/s)
• densidade: 1.1 g/cm³
• temperatura de armazenamento: 2-8°C

Descrição

Aplicação

Nanosilver inkjet ink finds use in the development of emerging energy technologies such as printed solar cells, energy storage devices, and printed heaters. The ink enables the deposition of conductive layers and electrodes required for efficient energy generation, storage, and management. It is also recommended for IoT applications including antennas (HF, UHF) and sensors, OPV and OLED grids, electrodes, touchscreen bezel busbars.

This Smart′Ink S-CS01520 conductive silver ink is particularly well suited for applications requiring high conductivity and high resolution. This ink, based on nano silver particles, is perfectly suited to design conductive traces on flexible substrates. It is also recommended for IoT applications including antennas (HF, UHF) and sensors, OPV and OLED grids, electrodes, touchscreen bezel busbars.

This ink has been developed to allow photonical curing to enable high throughput printing.

Compatible Printing Method: inkjet printing
Compatible Print heads: RICOH (MH5420), XAAR (1003 GS6, 128), KONIKA MINOLTA (KM512SHx, KM1024iMHE, KM1024LHB), FUJIFILM (Dimatix DMP series cartridge)
Compatible substrates: PET (Melinex 406, Melinex 339, Melines 520, Arcophane TCA, Arcophane STS, Folex BG-71), PEN (Teonex), Kapton^® , Ceramic
Recommended surface treatment for substrates:

• Temperature stabilization
• Argon plasma treatment

Características e benefícios

• Improved conductivity
• Superior resolution (increased with substrate surface treatment)
• Good bending resistance, smooth surface
• Shiny coating, mirror effect
• Optimized nano-particle content
• Curing process compatibility: photonic, NIR, low vacuum oven, thermal curing
• Cleaning solution: C-FS21511
• Non-toxic (No CMR ink)

Informações legais

Product of Genes′Ink

Kapton is a registered trademark of E. I. du Pont de Nemours and Company

Informações de segurança

• Pictogramas: GHS02,GHS05,GHS09
• Palavra indicadora: Danger
• Frases de perigo: H226,H315,H318,H410
• Declarações de precaução: P210 - P233 - P273 - P280 - P303 + P361 + P353 - P305 + P351 + P338
• Classificações de perigo: Aquatic Acute 1 - Aquatic Chronic 1 - Eye Dam. 1 - Flam. Liq. 3 - Skin Irrit. 2
• Código de classe de armazenamento: 3 - Flammable liquids
• Classe de risco de água (WGK): WGK 3
• Ponto de fulgor (°F): 140.0 °F
• Ponto de fulgor (°C): 60 °C