1.52321

Chromolith^® HighResolution RP-18 endcapped (monolithic) HPLC Columns

L × I.D. 50 mm × 2 mm HPLC Column

• Synonim(y): Chromolith^® HighResolution RP-18 endcapped 50-2 HPLC column
• Kod UNSPSC: 41115709
• NACRES: SB.52

Właściwości

• product name: Chromolith^® HighResolution RP-18 endcapped, L × I.D. 50 mm × 2 mm HPLC column
• Poziom jakości: 100
• Właściwości: endcapped
• zakres etykietowania: 18% Carbon loading
• Parametry: 200 bar pressure; 50 °C max. temp.
• metody: HPLC: suitable; mass spectrometry (MS): suitable (High)
• kolumna dł. × śr. wewn.: 50 mm × 2 mm
• powierzchnia: 250 m²/g
• macierz: highly porous; monolithic silica
• grupa aktywna macierzy: C18 bonding phase, octadecylsilane (ODS)
• wielkość porów: 1.5 μm macroporosity; 15 nm mesoporosity
• operating pH range: 2-7.5

Opis

Opis ogólny

Chromolith^® columns are made of monolithic silica with a characteristic bimodal pore structure.

Chromolith^® HighResolution RP-18 endcapped columns have macropores with 1.15 μm diameter, giving a column efficiency exceeding 140,000 plates/meter. The mesopores are 15 nm (150 Å), and the surface modification is octadecylsilane with full end-capping. Chromolith^® HighResolution RP-18 endcapped columns fall under the USP L1 Classification. The column efficiency is comparable to a 2.7 to 3 μm particle size fully porous particulate column.
The column dimension of 50 mm length and 2 mm I.D. is the best choice for fast and high-resolution separations meeting UHPLC and LC-MS needs.

Chromolith^® HighResolution RP-18 endcapped columns with 2 mm internal diameter are ideal for use with UHPLC or UPLC instruments, thanks to their very small internal volumes. A particular benefit is very fast analysis, reduced sample preparation and the low column backpressure. Ultra-high performance and extremely low operating pressure make Chromolith^® 2 mm I.D. columns truly unique. Chromolith^® and Chromolith^® HighResolution columns are perfectly suitable for LC-MS use; however, the column dimension of 2 mm I.D. or below is preferred to be used in LC-MS methods.

The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity

The recommended Guard-columns are:
Chromolith^® HighResolution RP-18 endcapped 5-2 guard cartridges (3 pieces) [1.52325] with the Chromolith^® Guard Cartridge Holder 5 mm x 2 mm [1.52355]

Learn more:
Brochure: Race through your Separations on Any System. Chromolith^® Monolithic Silica HPLC Columns

Flyer: UHPLC-like performance - Rapid and Robust at Low Pressure - Chromolith^® HighResolution RP-18 endcapped 2 mm I.D. HPLC Columns

All Supelco HPLC Columns, including monolithic Chromolith^® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument

Informacje prawne

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.