Z259322

Instatherm^® oil bath

low form, fits flask, 160 mL

• Kod UNSPSC: 41102404
• NACRES: NB.77

Właściwości

• wejście AC/DC: 115 V
• Materiały: metal alloy plate
• Właściwości: fits flask 160 mL
• producent / nazwa handlowa: Ace Glass 960138
• dostępność: not available in EU
• zakres pomiaru temperatury: ~250 °C
• pojemność: 160 mL
• śr. × wys.: 70 mm × 50 mm
• moc wyjściowa: 20 V, 5 A

Opis

Opis ogólny

• Rapid, even heat up to 250 °C
• Suitable for magnetic stirring
• No exposed coils
• Handles a variety of flask sizes and shapes

Instatherm baths have an integral, noble metal alloy fused permanently to the glass and covered with a tough silicone rubber treated glass cloth insulation that serves as a thermal barrier as well as protection against physical shock. Heat response is rapid and thermal lag is low. Typical heating rates are approx. 5 °C per min.

Baths are fitted with permanently attached SS banana type connections. Complete item includes bath, connecting cord, and clip to hold temperature sensor and thermometer.

Use with Ace multiple output (20, 40, 120 V AC) proportional temperature controllers to get precise, accurate, and safe heating since the output voltage is automatically limited. Single output controllers may be used to manually control temperature, but care must be taken not to exceed the maximum voltage rating of the individual bath.

Low form oil bath only

Przestroga

Caution: Never operate dry. Be certain that a heat exchange medium is in the bath before applying current.

Informacje prawne

Instatherm is a registered trademark of Ace Glass, Inc.

Ta strona może zawierać tekst przetłumaczony maszynowo.