추천 제품
형태
liquid
Quality Level
일반 설명
BOE 6:1 is 6 parts by volume 40% ammonium fluoride and 1 part by volume 49% HF.
Buffered oxide etchant (BOE) is a wet etchant used in microfabrication. Its primary use is in etching thin films of silicon dioxide (SiO2) or silicon nitride (Si3N4). It is a mixture of a buffering agent, such as ammonium fluoride (NH4F), and hydrofluoric acid (HF). Concentrated HF etches silicon dioxide too quickly for good process control and also peels photoresist used in lithographic patterning.
애플리케이션
Buffered oxide etchant (BOE) 6:1 can be used in the oxide removal of AlGaN/GaN-based high electron mobility transistors for gate photolithography. It can be used in a buffer oxide etchant method for the fabrication of micro biochip.
신호어
Danger
유해 및 위험 성명서
Hazard Classifications
Acute Tox. 1 Dermal - Acute Tox. 2 Oral - Acute Tox. 3 Inhalation - Eye Dam. 1 - Skin Corr. 1A
Storage Class Code
6.1B - Non-combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials
WGK
WGK 2
Flash Point (°F)
Not applicable
Flash Point (°C)
Not applicable
이미 열람한 고객
Effect of passivation on AlGaN/GaN HEMT device performance
2000 IEEE international symposium on compound semiconductors, 357-363 (2000)
Fabrication of a new micro bio chip and flow cell cytometry system using Bio-MEMS technology
Microelectronics Journal, 39(5), 717-722 (2008)
Surface cleaning and preparation in AlGaN/GaN-based HEMT processing as assessed by X-ray photoelectron spectroscopy
Applied Surface Science, 253(14), 6185-6190 (2007)
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.