コンテンツへスキップ
Merck
  • Molecularly imprinted polymers for cleanup and selective extraction of curcuminoids in medicinal herbal extracts.

Molecularly imprinted polymers for cleanup and selective extraction of curcuminoids in medicinal herbal extracts.

Analytical and bioanalytical chemistry (2014-07-25)
Meyliana Wulandari, Javier L Urraca, Ana B Descalzo, M Bachri Amran, Maria C Moreno-Bondi
要旨

This paper describes the synthesis of novel molecularly imprinted polymers (MIPs), prepared by a noncovalent imprinting approach, for cleanup and preconcentration of curcumin (CUR) and bisdemethoxycurcumin (BDMC) from medicinal herbal extracts and further analysis by high-performance liquid chromatography with fluorescence detection (HPLC-FLD). Two molecular mimics, a mixture of reduced BDMCs and 4-(4-hydroxyphenyl)-2-butanone (HPB), have been synthesized and applied as templates for MIP synthesis. The polymers were prepared using N-(2-aminoethyl) methacrylamide (EAMA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as the cross-linker (in a 1:5 molar ratio), and a mixture of acetonitrile/dimethylsulfoxide (90%, v/v) as porogen. MIPs prepared using a mixture of reduced BDMCs as template showed higher selectivity for CUR and BDMC than those obtained with HPB, with imprinting factors of 3.5 and 2.7 for CUR and BDMC, respectively, using H2O/acetonitrile (65:35, v/v) as mobile phase. The adsorption isotherms for CUR in the MIP and the nonimprinted polymer (NIP) were fitted to the Freundlich isotherm model, and the calculated average binding affinities for CUR were (17 ± 2) and (8 ± 1) mM(-1) for the MIP and the NIP, respectively. The polymers were packed into solid-phase extraction (SPE) cartridges, and the optimized molecularly imprinted solid-phase extraction (MISPE-HPLC) with fluorescence detection (FLD) method allowed the extraction of both curcuminoids from aqueous samples (50 mM NH4Ac, pH 8.8) followed by a selective washing with acetonitrile/NH4Ac, 50 mM at pH 8.8 (30:70%, v/v), and elution with 3 × 1 mL of MeOH. Good recoveries and precision ranging between 87 and 92%, with relative standard deviation (RSD) of <5.3% (n = 3), were obtained after the preconcentration of 10-mL solutions containing both CUR and BDMC at concentrations in the range of 0-500 μg L(-1). The optimized method has been applied to the analysis of both curcuminoids in medicinal herbal extracts.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
アセトニトリル, suitable for HPLC, gradient grade, ≥99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
メタノール, suitable for HPLC, ≥99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
エチルアルコール(純粋), for molecular biology
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジメチルスルホキシド, Hybri-Max, sterile-filtered, BioReagent, suitable for hybridoma, ≥99.7%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジメチルスルホキシド, ACS reagent, ≥99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
テトラヒドロフラン, inhibitor-free, suitable for HPLC, ≥99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジメチルスルホキシド, for molecular biology
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
塩酸, ACS reagent, 37%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジクロロメタン, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
メタノール, ACS reagent, ≥99.8%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジメチルスルホキシド, suitable for HPLC, ≥99.7%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジクロロメタン, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジメチルスルホキシド, sterile-filtered, BioPerformance Certified, meets EP, USP testing specifications, suitable for hybridoma
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
メタノール, suitable for HPLC, gradient grade, ≥99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
塩酸, ACS reagent, 37%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
テトラヒドロフラン, contains 200-400 ppm BHT as inhibitor, ACS reagent, ≥99.0%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジメチルスルホキシド, ReagentPlus®, ≥99.5%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
メタノール, HPLC Plus, ≥99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジクロロメタン, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
塩化水素 溶液, 4.0 M in dioxane
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジメチルスルホキシド, ≥99.5% (GC), suitable for plant cell culture
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
酢酸アンモニウム, ACS reagent, ≥97%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
アセトニトリル, ACS reagent, ≥99.5%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
アセトニトリル, ≥99.9% (GC)
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ジメチルスルホキシド, puriss. p.a., ACS reagent, ≥99.9% (GC)
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
酢酸アンモニウム, ≥99.99% trace metals basis
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
塩酸 溶液, 1.0 N, BioReagent, suitable for cell culture
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
アセトニトリル, suitable for HPLC, gradient grade, ≥99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
メタノール, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
塩酸, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
カタログ番号
容量
在庫状況
単価
数量