Passa al contenuto
Merck
HomeServiziServizi per i prodottiQualifica dei sistemiPharma QC Systems Qualification

Pharma QC Systems Qualification

Proven Protocols and Expertise to Qualify Our Products for Use in Your Testing Processes

cGMPs/cGLPs require equipment and test methods to be validated before routine use. This can be time consuming and delay the start of critical QC procedures. Receive prepared protocols and have your new QC systems validated by our experts to save time.

Reduce Development Time & Validation Cost

Your protocol preparation may require around 4 weeks of development (research on applicable regulations, acceptance criteria definition, test method writing, formatting, etc).

Estimated IQ/OQ completion time:

  • Without pre-written protocol: 6 to 7 weeks
  • With our pre-written protocol: 2 to 3 weeks
  • With on-site validation service: less than a week

Quickly integrate equipment into your process pipeline with confidence using product specific test methods.

Request Information

Related Technical Resources

Data Sheet: Milliflex Oasis® Services
Brochure: Microbiology Services
Data Sheet: Services Portfolio Supporting the Milliflex® Quantum System for Bioburden Testing
Data Sheet: Services Portfolio Supporting the PyroMAT™ Kit for Pyrogen Detection
Data Sheet: Services Portfolio Supporting the Steritest™ Family for Sterility Testing
Brochure: Training Program

Request Information

Rely on Our Comprehensive Validation Package either On-Site or Remote

We have experienced and trained validation engineers to assist in Validation Protocol implementation within the QC microbiology laboratory, so your QC/QA departments do not have to allocate resources. Technical training on your installed equipment is also provided during the validation engineer’s visit. In order to maintain regulatory compliance over time we recommend performing a periodic requalification of your QC testing equipment.

Validation Protocols

Our validation protocols are based on our internal product qualification test methods. These extensive protocols will enable the QC/QA Lab to quickly initiate your Validation Master Plan and perform IQ, OQ and PQ (requalification) with ease. They follow international guidelines such as EP/USP and GMP.

* Available for Steritest™, Steritest™ Symbio, Milliflex®, Milliflex Oasis®, Milliflex® Quantum, MAS-100 NT®, MAS-100 VF, MAS-100 Iso NT, MAS-100 Iso MH, MAS-100 CG Ex, RCS High Flow Touch

On-site IQ/OQ Service

Support for the qualification of your laboratory equipment:

  • Execution of the test methods
  • IQ and OQ sections of the final report is completed, ready for QA approval
  • Operator training
  • Duration: minimum 1.5 day depending on number of systems and consumables to be validated

* Available for Steritest™, Steritest™ Symbio, Milliflex®, Milliflex Oasis®, Milliflex® Quantum, MAS-100 NT®, MAS-100 VF, MAS-100 Iso NT, MAS-100 Iso MH, MAS-100 CG Ex, RCS High Flow Touch

Remote Validation Consultancy Service

If subcontracting to us the execution of your IQ & OQ or requalification is not an option in these times of social distancing, get expert support to execute it yourself from our Validation Engineers through a customized Remote Validation Consultancy. It all starts with an upfront discussion to understand your needs and size the consulting service. The coaching is then delivered live through a video conferencing system by our validation experts, covering topics as diverse as instrument and consumables usage training, good documentation practices, test plan set-up, data analysis, tips & tricks and much more.

Duration: Customized units of ½ day split over several calls.

* Available for Steritest™, Steritest™ Symbio, Milliflex®, Milliflex Oasis®, Milliflex® Quantum, MAS-100 NT®, MAS-100 VF, MAS-100 Iso NT, MAS-100 Iso MH, MAS-100 CG Ex, RCS High Flow Touch

On-Site Essential Requalification Service

Requalification work performed on laboratory equipment after the yearly preventive maintenance:

  • Requalification protocol to be ordered separately
  • IQ and OQ test procedures (physical tests) + data formatting and report finalization
  • Furniture of calibrated tools (flow meter, stopwatch, etc.)
  • Duration: 0,5 day, recommended frequency: every year

* Available for Steritest™, Steritest™ Symbio, Milliflex®, Milliflex Oasis®

To learn more about our method validation and other consultancy services, visit our “Method Development and Validation” page.

Related Services
Programmi di assistenza e manutenzione
Esplorate i nostri programmi di assistenza e manutenzione per i sistemi di purificazione dell’acqua Milli-Q e per i nostri sistemi per le analisi microbiologiche.
Pharma Microbiology Method Development & Validation
When a microbial test method (S.O.P.) needs to be set up for a new product or improved for a product that demonstrates antimicrobial effects and/or filtration issues, our applications laboratory can develop a method that is compliant with applicable regulations (Pharmacopoeias). As a company, we are known for the quality of our products. We apply these same high standards to our methods development assignments and keep the same strict attention to regulatory compliance.
Installazione di sistemi e attrezzature
Installazione di sistemi e attrezzature
Related Product Categories
Campionatori d'aria per il conteggio delle particelle vitali
I campionatori attivi dell’aria fanno impattare sulla superficie di un terreno agarizzato i microrganismi presenti in un volume d’aria noto, per rilevare le unità formanti colonia. Le nostre serie di campionatori d’aria MAS-100® e RCS® forniscono risultati accurati con buona ripetibilità e nel rispetto delle normative.
Consumabili, terreni e strumenti per test di sterilità
Strumenti di laboratorio e consumabili per il test di sterilità nel controllo della qualità microbiologica: terreni, pompe, strumenti e accessori.
Test dei pirogeni
Il test dei pirogeni rappresenta un passaggio cruciale per garantire la sicurezza delle preparazioni parenterali e dei dispositivi medici. Il test dell’attivazione monocitaria (MAT) è un test di pirogenicità in vitro che permette di rilevare in un’unica analisi sia i pirogeni endotossici sia quelli non endotossici.
Filtrazione microbica
Sistemi di filtrazione su membrana completi per risultati accurati nella determinazione della carica microbica. Tecnologie rapide per le analisi microbiologiche, in grado di ridurre i tempi necessari per ottenere i risultati.
Related Applications
Determinazione della carica microbica (bioburden)
La determinazione del bioburden consente di misurare i livelli di contaminazione microbica di acqua, materie prime e prodotti finiti.
Test dei pirogeni
Il test dei pirogeni serve a misurare il livello di pirogenicità di prodotti parenterali, un parametro richiesto per il rilascio dei farmaci parenterali sterili.
Campionamento e monitoraggio dell’aria
Il campionamento e monitoraggio dell'aria viene utilizzato per misurare il livello degli inquinanti atmosferici nell’ambiente, nelle aree industriali e negli interni definendone la qualità sulla base degli standard stabiliti dalle agenzie sanitarie e di regolamentazione.
Test di sterilità
Il test di sterilità rappresenta un processo essenziale necessario per la convalida della sterilizzazione. La filtrazione su membrana costituisce uno dei metodi preferiti per il test di sterilità di prodotti farmaceutici, alimenti e bevande, materiale di origine tissutale e altri prodotti che devono essere sterili.
Autenticati per continuare

Per continuare a leggere, autenticati o crea un account.

Non hai un Account?