Pular para o conteúdo
Merck
Todas as fotos(1)

Documentos Principais

Visualizar Toda a Documentação

2637501

Supelco

Inlet Liner, Direct (SPME) Type, Straight Design (unpacked)

pkg of 1 ea

Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(1)

About This Item

Código UNSPSC:
12000000

embalagem

pkg of 1 ea

C × D.E. × D.I.

78.5 mm × 6.5 mm × 0.75 mm

Procurando produtos similares? Visita Guia de comparação de produtos

Descrição geral

The liner is the second most important part of the inlet. It is the centrepiece of the inlet system, basically a glass tube between the septum and the column, where the sample is evaporated and brought into the gas phase. Split/splitless inlet allows fast sample introduction and vaporization which is highly advantageous for small sample sizes. Though the injection modes for both split and splitless are carried out on the same inlet, there are certain differences like a splitless injection involves the complete introduction of the sample into the column whereas in a split injection, the sample is divided in the inlet as a result only part of the sample is introduced in the column.
Deactivated (silanized) glass inlet liner for capillary injection ports.
  • Fits Agilent (5890, 6890, and 7890)
  • Fits Finnigan (9001GCQ)
  • Fits Varian (CP-1177 Injector)

Código de classe de armazenamento

13 - Non Combustible Solids

Classe de risco de água (WGK)

WGK 3

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Escolha uma das versões mais recentes:

Certificados de análise (COA)

Lot/Batch Number

Lamentamos, não temos COA para este produto disponíveis online no momento.

Se precisar de ajuda, entre em contato Atendimento ao cliente

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Ratnasekhar Ch et al.
Food chemistry, 334, 127553-127553 (2020-07-21)
Rice is one of the most important cereals for human nutrition and is a basic staple food for half of the global population. The assessment of rice geographical origins in terms of its authenticity is of great interest to protect
Fire Debris Analysis.
Stauffer E
Science, 249-252 (2007)

Artigos

The Effect of Container Materials on Production of Light Induced Milk – A Study Using SPME-GC-MS

Various plastics used as barriers to the production of off-flavors in light exposed milk were examined using HS-SPME with a new Carboxen®/PDMS coated Nitinol fiber followed by GC-MS analysis allowing detection of low MW analytes at levels <1 ng/mL.

Protocolos

Cannabis Terpene Analysis by Headspace SPME GC/MS
Headspace SPME-GC/MS Analysis of Terpenes in Hops and Cannabis
Analysis of Bisphenol A in Food
by Solid Phase Microextraction Using an Overcoated Fiber

Bisphenol A (BPA) is suspected to be an endocrine disruptor. Regulations on specific migration limits (SML) from food contact materials are getting tighter (EU 2018/213) requiring more sensitive determinations. An overcoated SPME fiber provides the durability necessary for direct immersion into foods such as canned soup and pumpkin, allowing for low level analysis of BPA via SPME-GC-MS/MS.

Analysis of Residual Solvents in Hemp Extract by Headspace SPME-GC/MS

The use of solid phase microextraction (SPME) allowed for the straightforward, fast, sensitive, and accurate GC/MS determination of the residual solvent content of spiked and unspiked samples of hemp extract.

Conteúdo relacionado

GC/MS/MS Analysis of Bisphenol A (BPA) in a Fruit Flavored Energy Drink on the SLB-PAHms Column After SPME Using an Overcoated SPME Fiber

GC/MS/MS Analysis of Bisphenol A (BPA) in a Fruit Flavored Energy Drink on the SLB-PAHms Column After SPME Using an Overcoated SPME Fiber

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica