Direkt zum Inhalt
Merck
  • Rapid analysis of trace volatile formaldehyde in aquatic products by derivatization reaction-based surface enhanced Raman spectroscopy.

Rapid analysis of trace volatile formaldehyde in aquatic products by derivatization reaction-based surface enhanced Raman spectroscopy.

The Analyst (2014-05-31)
Zhuomin Zhang, Cheng Zhao, Yunjian Ma, Gongke Li
ZUSAMMENFASSUNG

Toxic formaldehyde is sometimes used illegally as a food preservative, however, on-site rapid analysis of trace formaldehyde in aquatic products remains a challenge. In this work, a simple on-site rapid quantification method for trace volatile formaldehyde in aquatic products was developed by a derivative reaction-based surface enhanced Raman spectroscopy (SERS) technique coupled with a homemade portable purge-sampling device. Trace formaldehyde separated from complicated aquatic matrices via a purge-sampling procedure was reacted with a derivative reagent to produce a Raman-active analyte for consequent SERS analysis. Au/SiO2 nanoparticles (NPs) were employed as the enhancement substrate to achieve significant enhancement of Raman signal intensity. Conditions of derivative reaction and SERS detection were optimized in detail, and the selectivity of this analytical method was also evaluated based on related analogs. Under optimal conditions, an extremely low detection limit of 0.17 μg L(-1) was achieved. Trace volatile formaldehyde can be found in fresh squid and shrimp samples without obvious matrix interference, and this was quantified to be 0.13-0.21 mg kg(-1) using the described method. The recoveries of spiked aquatic product samples were found to be 70.0-89.1% with RSDs of 2.3-7.2% (n = 3). The results suggest that the proposed method is reliable and suitable for on-site rapid analysis of trace formaldehyde in aquatic products.

MATERIALIEN
Produktnummer
Marke
Produktbeschreibung

Sigma-Aldrich
Acetaldehyd, natural, FG
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Propionaldehyd, reagent grade, 97%
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Capronaldehyd, 98%
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Supelco
Acetaldehyd, PESTANAL®, analytical standard
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Acetaldehyd -Lösung, 50 wt. % in ethanol
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Butyraldehyd, purified by redistillation, ≥99.5%
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Acetaldehyd -Lösung, 40 wt. % in H2O
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Acetaldehyd, ACS reagent, ≥99.5%
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Propionaldehyd, ≥97%, FG
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Butyraldehyd, ≥96.0%
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Capronaldehyd, ≥97%, FCC, FG
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Acetaldehyd -Lösung, 5 M in THF
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Acetaldehyd, puriss. p.a., anhydrous, ≥99.5% (GC)
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Acetaldehyd -Lösung, natural, 50 wt. % ethanol, FG
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Capronaldehyd, natural, ≥95%, FG
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Butyraldehyd, natural, FG
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Acetaldehyd, ReagentPlus®, ≥99.0% (GC)
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Sigma-Aldrich
Acetaldehyd -Lösung, 40 wt. % in isopropanol
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Supelco
Capronaldehyd, analytical standard
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Supelco
Propionaldehyd, analytical standard
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge
Supelco
Butyraldehyd, analytical standard, contains ~0.1% 2,6-di-tert-butyl-4-methylphenol and ~1% water as stabilizer
SKU
Packungsgröße
Verfügbarkeit
Preis
Menge