Skip to Content
MilliporeSigma
  • Comparison of different urine pretreatments for biological monitoring of pyrethroid insecticides.

Comparison of different urine pretreatments for biological monitoring of pyrethroid insecticides.

Journal of analytical toxicology (2014-12-30)
Hiroki Toshima, Jun Yoshinaga, Hiroaki Shiraishi, Yuki Ito, Michihiro Kamijima, Jun Ueyama
ABSTRACT

During a cross-validation practice of urinary analysis of pyrethroid insecticide metabolite (3-phenoxybenzoic acid, 3-PBA) by two laboratories (Lab A and Lab B), difference in 3-PBA concentration was noticed. The analytical methods used in the exercise were enzymatic deconjugation (glucuronidase/sulfatase) followed by solid phase extraction and isotope dilution LC-MS-MS determination (Lab A) and acidic deconjugation followed by liquid-liquid extraction and gas chromatography-mass spectrometry determination (Lab B). A significant difference was found for one of the five samples: lower value was obtained in Lab A. Use of acidic deconjugation in Lab A resulted in comparable value with the analytical result for this sample originally obtained in Lab B. The comparison was extended to 42 urine samples taken from Japanese males in Lab A by using the two different deconjugation methods and LC-MS-MS determination. Significantly lower value was obtained for enzymatic deconjugation in some of the 42 urine samples. The results suggested the presence of other conjugated species of 3-PBA than glucuronide and sulfate in human urine. Although the overall agreement between the values obtained by the deconjugation methods was fair, it appears that urine samples should be pretreated by acidic deconjugation for the analysis in biological monitoring of pyrethroid exposure.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Hydrochloric acid, ACS reagent, 37%
Supelco
tert-Butyl methyl ether, analytical standard
Sigma-Aldrich
tert-Butyl methyl ether, anhydrous, 99.8%
Supelco
Hydrogen chloride – ethanol solution, ~1.25 M HCl, for GC derivatization, LiChropur
Sigma-Aldrich
Hydrochloric acid solution, 0.5 M
Sigma-Aldrich
Hydrochloric acid solution, 6 M
Sigma-Aldrich
Hydrogen chloride – ethanol solution, 0.1 M in ethanol
Sigma-Aldrich
Hydrochloric acid solution, 12 M
Sigma-Aldrich
Hydrochloric acid solution, 0.2 M
Sigma-Aldrich
Hydrochloric acid solution, 0.05 M
Sigma-Aldrich
Hydrochloric acid solution, 0.02 M
Sigma-Aldrich
Hydrochloric acid solution, 0.01 M
Sigma-Aldrich
Hydrochloric acid solution, 2 M
Sigma-Aldrich
Hydrochloric acid solution, 1 M
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, for molecular biology
Supelco
Hydrogen chloride – methanol solution, ~1.25 m HCl (T), for GC derivatization, LiChropur
Supelco
Hydrogen chloride – 2-propanol solution, ~1.25 M HCl (T), for GC derivatization, LiChropur
Sigma-Aldrich
tert-Butyl methyl ether, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
Sigma-Aldrich
Hydrochloric acid, JIS special grade, 35.0-37.0%
Sigma-Aldrich
tert-Butyl methyl ether, SAJ special grade, ≥99.0%
Sigma-Aldrich
Hydrochloric acid, SAJ first grade, 35.0-37.0%
Sigma-Aldrich
Hydrogen chloride solution, 3 M in cyclopentyl methyl ether (CPME)
Sigma-Aldrich
Hydrochloric acid, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Hydrochloric acid, ACS reagent, 37%
Sigma-Aldrich
Hydrochloric acid, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Hydrochloric acid, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Hydrogen chloride solution, 2.0 M in diethyl ether
Sigma-Aldrich
Hydrogen chloride solution, 4.0 M in dioxane
Sigma-Aldrich
tert-Butyl methyl ether, ACS reagent, ≥99.0%