All Photos(1)



Methyl methacrylate

contains ≤30 ppm MEHQ as inhibitor, 99%

Methyl 2-methylpropenoate
Linear Formula:
CAS Number:
Molecular Weight:
EC Number:
MDL number:
PubChem Substance ID:

Quality Level

vapor density

3.5 (vs air)

vapor pressure

29 mmHg ( 20 °C)



autoignition temp.

815 °F


≤30 ppm MEHQ as inhibitor

expl. lim.

12.5 %

refractive index

n20/D 1.414 (lit.)


100 °C (lit.)


−48 °C (lit.)


0.936 g/mL at 25 °C (lit.)

storage temp.


SMILES string




InChI key


Looking for similar products? Visit Product Comparison Guide


FlameExclamation mark

Signal Word


Hazard Statements

Hazard Classifications

Flam. Liq. 2 - Skin Irrit. 2 - Skin Sens. 1 - STOT SE 3

Target Organs

Respiratory system

Storage Class Code

3 - Flammable liquids



Flash Point(F)

50.0 °F - closed cup

Flash Point(C)

10 °C - closed cup

Personal Protective Equipment

dust mask type N95 (US), Eyeshields, Gloves

Certificate of Analysis

Enter Lot Number to search for Certificate of Analysis (COA).

Certificate of Origin

Enter Lot Number to search for Certificate of Origin (COO).

J Ratliff et al.
Spine, 26(13), E300-E302 (2001-07-18)
Case report and literature review. Clinicians use methylmethacrylate vertebroplasty to treat vertebral hemangiomas, metastases, and osteoporotic fractures. Cement may leak out of the vertebral body and compress the adjacent spinal cord and nerve roots. We review a case of nerve-root
Daniel S Thoma et al.
Journal of periodontal & implant science, 49(3), 171-184 (2019-07-10)
To evaluate the effects of intra-alveolar socket grafting, subepithelial connective tissue grafts, and individualized abutments on peri-implant hard and soft tissue outcomes following immediate implant placement. This randomized experimental study employed 5 mongrel dogs, with 4 sites per dog (total
Michael M Bornstein et al.
Journal of endodontics, 41(6), 804-811 (2015-04-13)
The aim of this study was to evaluate the concordance of 2- and 3-dimensional radiography and histopathology in the diagnosis of periapical lesions. Patients were consecutively enrolled in this study provided that preoperative periapical radiography (PR) and cone-beam computed tomographic
Kevin N Johnson et al.
The Annals of thoracic surgery, 99(6), 1936-1943 (2015-04-30)
Successful repair of recurrent pectus excavatum (PE) after failed open procedure has been reported using minimally invasive repair (MIRPE) and open approaches. Neither approach alone may be adequate for some patients. A hybrid technique for repair is presented for revision
M A Dębowski et al.
The Review of scientific instruments, 86(10), 105115-105115 (2015-11-02)
An apparatus designed and manufactured for evaluation of flow erosion of coatings or layers is presented in this paper. The setup was primarily designed for coatings intended to perform in dynamic marine environments but can be also used for evaluation


Reversible Addition Fragmentation Chain Transfer (RAFT) Polymerization

RAFT (Reversible Addition Fragmentation chain Transfer) polymerization is a reversible deactivation radical polymerization (RDRP) and one of the more versatile methods for providing living characteristics to radical polymerization.

Continuous Flow Manufacturing for Monomer Synthesis

The manufacture of monomers for use in ophthalmic applications is driven by the need for higher purity, improved reliability of manufacturing supply, but ultimately by the need for the increased comfort, convenience, and safety of contact lens wearers. Daily wear contact lenses have the potential to fill this need for many customers; however, their widespread use is constrained by higher costs compared to weekly- or monthly-based lenses. New approaches that improve cost structure and result in higher quality raw materials are needed to help make contact lenses more affordable and accelerate growth of the contact lens market.


ARGET ATRP: Procedure for PMMA Polymer Brush Growth

We presents an article about ARGET ATRP, and its procedure for PMMA polymer brush growth. Surface preparation before polymer brush growth consists of two steps: surface cleaning and initiator monolayer deposition.

Preparation of Monodisperse Polymer Spheres

Monodisperse, surfactant-free polymer spheres for use as colloidal crystal templates can be easily obtained in reasonably large quantities. Typical synthesis methods for poly(methyl methacrylate) (PMMA) and poly(styrene) (PS) by emulsifier free emulsion polymerization are described below and yield spheres several hundred nanometers in diameter.

RAFT Polymerization Procedures

RAFT (Reversible Addition-Fragmentation chain Transfer) is a form of living radical polymerization involving conventional free radical polymerization of a substituted monomer in the presence of a suitable chain transfer (RAFT) reagent.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service