All Photos(2)



Carbon nanofibers

graphitized (iron-free), composed of conical platelets, D × L 100 nm × 20-200 μm

PR-25-XT-HHT, Conical carbon nanofibers
Empirical Formula (Hill Notation):
Molecular Weight:
MDL number:
PubChem Substance ID:

Quality Level



D × L

100 nm × 20-200 μm


<100 ppm Iron content

average diameter

130 nm

pore size

0.075 cm3/g average pore volume
124 Å average pore diameter

surface area

average specific surface area 24 m2/g


3652-3697 °C


1.9 g/mL at 25 °C

bulk density

0.5‑3.5 lb/cu.ft



InChI key


Looking for similar products? Visit Product Comparison Guide

Related Categories


Carbon nanofibers (CNFs) are carbon based nanostructures that can be used for a variety of applications such as tissue engineering, lithium based batteries, supercapacitors, and solar desalinations.


25 g in glass bottle

Preparation Note

Produced by Floating Catalyst Vapor-Grown Method.

Legal Information

Product of Pyrograf® Products Inc.
Pyrograf is a registered trademark of Applied Sciences, Inc.


Exclamation mark

Signal Word


Hazard Statements

Hazard Classifications

Eye Irrit. 2 - STOT SE 3

Target Organs

Respiratory system

Storage Class Code

11 - Combustible Solids



Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Certificate of Analysis

Certificate of Origin

More documents

Quotes and Ordering

Electrically conductive chitosan/carbon scaffolds for cardiac tissue engineering
Martins AM, et al.
Biomacromolecules, 15(2), 635-643 (2014)
CNFs/S 1-x Se x Composites as Promising Cathode Materials for High-Energy Lithium-Sulfur Batteries
Pandey GP, et al.
MRS Advances, 4(14), 821-828 (2019)
Novel draw solution for forward osmosis based solar desalination
Amjad M, et al.
Applied Energy, 230(14), 220-231 (2018)
Effect of carbon nanofibers on electrode performance of symmetric supercapcitors with composite alpha-MnO2 nanorods
Rao TP, et al.
Journal of alloys and compounds, 789(14), 518-527 (2019)
Catharina Vendl et al.
The Journal of experimental biology, 218(Pt 21), 3425-3434 (2015-11-06)
Fundamental differences in methane (CH4) production between macropods (kangaroos) and ruminants have been suggested and linked to differences in the composition of the forestomach microbiome. Using six western grey kangaroos (Macropus fuliginosus) and four red kangaroos (Macropus rufus), we measured


Carbon Nanofiber Applications & Properties

Pyrograf®-III vapor-grown carbon nanofibers are within the class of materials termed multi-walled carbon nanotubes (MWCNTs), and are produced by the floating catalyst method.

Lightweight Metal Matrix Nanocomposites - Stretching the Boundaries of Metals

Composite materials that traditionally incorporate micron scale reinforcements in a bulk matrix offer opportunities to tailor material properties such as hardness, tensile strength, ductility, density, thermal and electrical conductivity, and wear resistance.

3D Printing of Carbon Fiber-Reinforced Composites

3D printing is a type of additive manufacturing that can be used to rapidly fabricate components with highly customizable geometries.

Related Content

Tissue Engineering

Tissue engineering fabricates tissues cultures from scaffolds, living cells, and biologically active molecules by simulating the microenvironment of the body to repair or replace damaged tissue.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service