Skip to Content
MilliporeSigma
  • HPLC-UV method validation for the identification and quantification of bioactive amines in commercial eggs.

HPLC-UV method validation for the identification and quantification of bioactive amines in commercial eggs.

Talanta (2015-05-25)
Tadeu Chaves de Figueiredo, Débora Cristina Sampaio de Assis, Liliane Denize Miranda Menezes, Guilherme Resende da Silva, Isabela Pereira Lanza, Luiz Guilherme Dias Heneine, Silvana de Vasconcelos Cançado
ABSTRACT

A quantitative and confirmatory high-performance liquid chromatography with ultraviolet detection (HPLC-UV) method for the determination of bioactive amines in the albumen and yolk of commercial eggs was developed, optimized and validated by analyte extraction with trichloroacetic acid and pre-column derivatization with dansyl chloride. Phenylethylamine, putrescine, cadaverine, histamine, tyramine, spermidine and spermine standards were used to evaluate the following performance parameters: limit of detection (LoD), limit of quantification (LoQ), selectivity, linearity, precision, recovery and ruggedness. The LoD of the method was defined from 0.2 to 0.3 mg kg(-1) for the yolk matrix and from 0.2 to 0.4 mg kg(-1) for the albumen matrix; the LoQ was from 0.7 to 1.0 mg kg(-1) for the yolk matrix and from 0.7 to 1.1 mg kg(-1) for the albumen matrix. The validated method exhibited excellent selectivity and separation of all amines with coefficients of determination higher than 0.99. The obtained recovery values were from 90.5% to 108.3%, and the relative standard deviation (RSD) was lower than 10% under repeatability conditions for the studied analytes. The performance parameters show the validated method to be adequate for the determination of bioactive amines in egg albumen and yolk.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Acetonitrile, ≥99.8%, for residue analysis, JIS 1000
Sigma-Aldrich
Toluene, JIS 1000, for residue analysis, ≥99.8%
Sigma-Aldrich
Toluene, JIS special grade, ≥99.5%
Sigma-Aldrich
Toluene, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acetonitrile, for residue analysis, JIS 5000
Sigma-Aldrich
Acetonitrile, for chromatography
Sigma-Aldrich
Acetonitrile, JIS special grade, ≥99.5%
Sigma-Aldrich
Acetonitrile, ≥99.8%, suitable for HPLC
Sigma-Aldrich
Acetonitrile, SAJ first grade, ≥99.0%
Sigma-Aldrich
Acetonitrile, ≥99.8%, for residue analysis, JIS 300
Sigma-Aldrich
Toluene, JIS 300, for residue analysis, ≥99.8%
Sigma-Aldrich
Toluene, SAJ first grade, ≥99.0%
Sigma-Aldrich
Poly(tetrafluoroethylene), powder, 200 μm particle size
Sigma-Aldrich
Acetonitrile, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Acetonitrile, electronic grade, 99.999% trace metals basis
Sigma-Aldrich
Poly(tetrafluoroethylene), powder, ≥350 μm particle size
Sigma-Aldrich
Spermidine trihydrochloride, ≥98% (TLC)
Sigma-Aldrich
Hydrogen chloride, ReagentPlus®, ≥99%
Sigma-Aldrich
Poly(tetrafluoroethylene), powder, >40 μm particle size
Sigma-Aldrich
Poly(tetrafluoroethylene), beads
Sigma-Aldrich
Spermidine trihydrochloride, BioXtra, ≥99.5% (AT)
SAFC
Spermidine trihydrochloride, ≥99.0% (AT)
Sigma-Aldrich
Acetonitrile, anhydrous, 99.8%
Sigma-Aldrich
Acetonitrile, ≥99.5%, ACS reagent
Sigma-Aldrich
Nitrogen, ≥99.998%
Sigma-Aldrich
Toluene, anhydrous, 99.8%
Sigma-Aldrich
Sodium bicarbonate-12C, 99.9 atom % 12C
Sigma-Aldrich
Poly(tetrafluoroethylene), powder (free-flowing), 1 μm particle size
Supelco
Toluene, HPLC grade, 99.8%
Supelco
Acetonitrile, HPLC grade, ≥99.93%