CC160-1050UG
ECMatrix-511 E8 Laminin Substrate
Xeno-free laminin-511 coating for feeder-free pluripotent stem cell cultures, 1050 μg (CHO-S derived)
Sign Into View Organizational & Contract Pricing
All Photos(1)
About This Item
UNSPSC Code:
12352202
Recommended Products
form
liquid
packaging
pkg of 6 X 175 μg
technique(s)
cell culture | stem cell: suitable
storage temp.
2-8°C
Application
Xeno-free laminin-511 coating for feeder-free pluripotent stem cell cultures, 1050 μg (CHO-S derived)
Components
6 X 175 μg ECMatrix-511 E8 Laminin Substrate (0.5 mg/mL in PBS). Expressed in CHO-S cells.
Quality
- Purity (SDS-Page): > 95%
- Endotoxin Test: = 750 EU/mg
- Mycoplasma Test: Negative
- Sterility Test: Negative
- Integrin Binding Assay (kDa): = 10 nM
Preparation Note
Depending on application, either a precoating or non-precoating method can be used to culture pluripotent stem cells.
Non-Precoating Method:
1. Detach cells into small clumps or single cells using Accutase.
2. Add ECMatrix-511 to fresh media at a final concentration of 0.25 μg/cm2 (for example: for one well of a 6-well plate add 5 uL of the 0.5 mg/mL stock solution).
3. Add cells to the ECMatrix-511/Media and plate the cells at desired density.
Precoating Method
1. Dilute the 0.5 mg/mL stock solution with sterile PBS to achieve a 2.5 ug/mL working solution.
2. Coat dishes with ECMatrix-511 at 0.25 μg/cm2 (for example, for one well of a 6-well plate add 1 mL of the 2.5 μg/mL working solution).
3. Incubate for 1 hour at 37°C, 3 hours at room temperate or overnight at 4°C.
4. Before use, remove remaining fluid from the coated surface (do not rinse).
5. Detach cells into small clumps using Accutase.
6. Plate the cells at desired density.
Note: Do not allow the plates to dry, briefly spin down all liquids in the tube before use, avoid repeated freeze-thaw cycles.
Non-Precoating Method:
1. Detach cells into small clumps or single cells using Accutase.
2. Add ECMatrix-511 to fresh media at a final concentration of 0.25 μg/cm2 (for example: for one well of a 6-well plate add 5 uL of the 0.5 mg/mL stock solution).
3. Add cells to the ECMatrix-511/Media and plate the cells at desired density.
Precoating Method
1. Dilute the 0.5 mg/mL stock solution with sterile PBS to achieve a 2.5 ug/mL working solution.
2. Coat dishes with ECMatrix-511 at 0.25 μg/cm2 (for example, for one well of a 6-well plate add 1 mL of the 2.5 μg/mL working solution).
3. Incubate for 1 hour at 37°C, 3 hours at room temperate or overnight at 4°C.
4. Before use, remove remaining fluid from the coated surface (do not rinse).
5. Detach cells into small clumps using Accutase.
6. Plate the cells at desired density.
Note: Do not allow the plates to dry, briefly spin down all liquids in the tube before use, avoid repeated freeze-thaw cycles.
Storage and Stability
ECMatrix-511 E8 Laminin Substrates should be stored at 2-8°C. Avoid multiple freeze-thaw cycles and protect from light.
Disclaimer
Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
Storage Class
12 - Non Combustible Liquids
wgk_germany
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service