コンテンツへスキップ
Merck
  • Simultaneous and high-throughput analysis of iodo-trihalomethanes, haloacetonitriles, and halonitromethanes in drinking water using solid-phase microextraction/gas chromatography-mass spectrometry: an optimization of sample preparation.

Simultaneous and high-throughput analysis of iodo-trihalomethanes, haloacetonitriles, and halonitromethanes in drinking water using solid-phase microextraction/gas chromatography-mass spectrometry: an optimization of sample preparation.

Journal of chromatography. A (2014-09-27)
Qian Luo, Xichao Chen, Zi Wei, Xiong Xu, Donghong Wang, Zijian Wang
要旨

When iodide and natural organic matter are present in raw water, the formation of iodo-trihalomethanes (Iodo-THMs), haloacetonitriles (HANs), and halonitromethanes (HNMs) pose a potential health risk because they have been reported to be more toxic than their brominated or chlorinated analogs. In the work, simultaneous analysis of Iodo-THMs, HANs, and HNMs in drinking water samples in a single cleanup and chromatographic analysis was proposed. The DVB/CAR/PDMS fiber was found to be the most suitable for all target compounds, although 75μm CAR/PDMS was better for chlorinated HANs and 65μm PDMS/DVB for brominated HNMs. After optimization of the SPME parameters (DVB/CAR/PDMS fiber, extraction time of 30min at 40°C, addition of 40% w/v of salt, (NH4)2SO4 as a quenching agent, and desorption time of 3min at 170°C), detection limits ranged from 1 to 50ng/L for different analogs, with a linear range of at least two orders of magnitude. Good recoveries (78.6-104.7%) were obtained for spiked samples of a wide range of treated drinking waters, demonstrating that the method is applicable for analysis of real drinking water samples. Matrix effects were negligible for the treated water samples with total organic carbon concentration of less than 2.9mg/L. An effective survey conducted by two drinking water treatment plants showed the highest proportion of Iodo-THMs, HANs, and HNMs occurred in treated water, and concentrations of 13 detected compounds ranged between the ng/L and the μg/L levels.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
tert-ブチルメチルエーテル, suitable for HPLC, ≥99.8%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
tert-ブチルメチルエーテル, ACS reagent, ≥99.0%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
tert-ブチルメチルエーテル, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
tert-ブチルメチルエーテル, reagent grade, ≥98%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ニトロメタン, ACS reagent, ≥95%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ニトロメタン, ReagentPlus®, ≥99.0%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
tert-ブチルメチルエーテル, puriss. p.a., ≥99.5% (GC)
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
フルオロベンゼン, 99%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
1-ブロモ-4-フルオロベンゼン, 99%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
tert-ブチルメチルエーテル, anhydrous, 99.8%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
ニトロメタン, suitable for HPLC, ≥96%
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
tert-ブチルメチルエーテル, reagent grade, 98%
カタログ番号
容量
在庫状況
単価
数量
Supelco
1-ブロモ-4-フルオロベンゼン, analytical standard
カタログ番号
容量
在庫状況
単価
数量
Supelco
フルオロベンゼン, analytical standard
カタログ番号
容量
在庫状況
単価
数量
Supelco
tert-ブチルメチルエーテル, analytical standard
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
tert-ブチルメチルエーテル, SAJ special grade, ≥99.0%
カタログ番号
容量
在庫状況
単価
数量
Supelco
tert-ブチルメチルエーテル, Pharmaceutical Secondary Standard; Certified Reference Material
カタログ番号
容量
在庫状況
単価
数量
Supelco
tert-ブチルメチルエーテル, suitable for HPLC, ≥99.8% (GC)
カタログ番号
容量
在庫状況
単価
数量
Sigma-Aldrich
tert-ブチルメチルエーテル, HPLC Plus, for HPLC, GC, and residue analysis, 99.9%
カタログ番号
容量
在庫状況
単価
数量