1.00316

Hydrochloric acid

25%, for analysis EMSURE^®

• Sinonimo/i: Cloruro di idrogeno
• Formula empirica (notazione di Hill): HCl
• Numero CAS: 7647-01-0
• Peso molecolare: 36.46
• Numero MDL: MFCD00011324
• Codice UNSPSC: 12352301
• NACRES: NA.21

Proprietà

• Nome del prodotto: Acido cloridrico, 25% for analysis EMSURE^®
• Tensione di vapore: 12 hPa ( 20 °C)
• Livello qualitativo: 300
• Nome Commerciale: EMSURE^®
• Saggio: ≥25.0% (alkalimetric)
• Stato: liquid
• Impurezze: ≤0.01 ppm As (Arsenic); ≤0.010 ppm Cd (Cadmium); ≤0.010 ppm Co (Cobalt); ≤0.010 ppm Li (Lithium); ≤0.010 ppm Mn (Manganese); ≤0.010 ppm Sr (Strontium); ≤0.010 ppm V (Vanadium); ≤0.020 ppm Ba (Barium); ≤0.020 ppm Be (Beryllium); ≤0.020 ppm Cr (Chromium); ≤0.020 ppm Cu (Copper); ≤0.020 ppm Mo (Molybdenum); ≤0.020 ppm Ni (Nickel); ≤0.020 ppm Pb (Lead); ≤0.050 ppm Al (Aluminium); ≤0.050 ppm Ge (Germanium); ≤0.050 ppm Tl (Thallium); ≤0.050 ppm Zn (Zinc); ≤0.100 ppm Bi (Bismuth); ≤0.100 ppm K (Potassium); ≤0.100 ppm Mg (Magnesium); ≤0.100 ppm Ti (Titanium); ≤0.100 ppm Zr (Zirconium); ≤0.200 ppm Fe (Iron); ≤0.5 ppm Free chlorine (Cl); ≤0.500 ppm Ca (Calcium); ≤0.500 ppm Na (Sodium); ≤1 ppm NH₄ (Ammonium); ≤1 ppm Sulfate (SO₄); ≤1 ppm Sulfite (SO₃); ≤50 ppm Bromide (Br)
• Residuo alla calcinazione: ≤5 ppm (as SO₄)
• Colore: APHA: ≤10
• pH: <1 (20 °C in H₂O)
• Viscosità cinematica: 1.73 cSt(20 °C)
• P. ebollizione: 107 °C/1013 hPa
• Stringa SMILE: Cl
• Punto di fusione: -52 °C
• Densità: 1.12 g/cm³ at 20 °C
• Temperatura di conservazione: 2-30°C
• InChI: 1S/ClH/h1H; VEXZGXHMUGYJMC-UHFFFAOYSA-N

Descrizione

Descrizione generale

for analysis EMSURE^®

Applicazioni

• Research on the Synthesis of Zinc-Ammonium Phosphate Using Galvanic Waste Sludge as a Source of Zinc: This study explores a novel approach using hydrochloric acid solution in the synthesis process aimed at valorizing waste materials. The article demonstrates a chemical strategy that enhances resource recovery, significantly contributing to waste minimization in industrial practices (Morgovan et al., 2024).


• Contactless conductivity sensor employing moist paper as absorbent for in-situ detection of generated carbon dioxide gas: The study integrates hydrochloric acid solutions in the development of a novel, cost-effective contactless conductivity sensor. This sensor uses a simple paper-based system for the in-situ monitoring of gases, providing a significant tool in environmental monitoring and analysis (Nacapricha et al., 2020).

Risultati analitici

Assay (alkalimetric)≥ 25.0 %Color≤ 10 HazenBromide (Br)≤ 50 ppmFree chlorine (Cl)≤ 0.5 ppmSulfate (SO₄)≤ 1 ppmSulfite (SO₃)≤ 1 ppmAl (Aluminium)≤ 0.050 ppmAs (Arsenic)≤ 0.01 ppmBa (Barium)≤ 0.020 ppmBe (Beryllium)≤ 0.020 ppmBi (Bismuth)≤ 0.100 ppmCa (Calcium)≤ 0.500 ppmCd (Cadmium)≤ 0.010 ppmCo (Cobalt)≤ 0.010 ppmCr (Chromium)≤ 0.020 ppmCu (Copper)≤ 0.020 ppmFe (Iron)≤ 0.200 ppmGe (Germanium)≤ 0.050 ppmK (Potassium)≤ 0.100 ppmLi (Lithium)≤ 0.010 ppmMg (Magnesium)≤ 0.100 ppmMn (Manganese)≤ 0.010 ppmMo (Molybdenum)≤ 0.020 ppmNH₄ (Ammonium)≤ 1 ppmNa (Sodium)≤ 0.500 ppmNi (Nickel)≤ 0.020 ppmPb (Lead)≤ 0.020 ppmSr (Strontium)≤ 0.010 ppmTi (Titanium)≤ 0.100 ppmTl (Thallium)≤ 0.050 ppmV (Vanadium)≤ 0.010 ppmZn (Zinc)≤ 0.050 ppmZr (Zirconium)≤ 0.100 ppmResidue on ignition (as SO₄)≤ 5 ppmMinimum shelf life: see product label

Note legali

EMSURE is a registered trademark of Merck KGaA, Darmstadt, Germany

Informazioni sulla sicurezza

• Pittogrammi: GHS05,GHS07
• Avvertenze: Danger
• Indicazioni di pericolo: H290 - H314 - H335
• Consigli di prudenza: P234 - P261 - P271 - P280 - P303 + P361 + P353 - P305 + P351 + P338
• Classi di pericolo: Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1B - STOT SE 3
• Organi bersaglio: Respiratory system
• Codice della classe di stoccaggio: 8B - Non-combustible, corrosive hazardous materials
• Classe di pericolosità dell'acqua (WGK): WGK 1
• Punto d’infiammabilità (°F): Not applicable
• Punto d’infiammabilità (°C): Not applicable