Passa al contenuto
Merck
Tutte le immagini(1)

Key Documents

View All Documentation

791512

Sigma-Aldrich

Platinum paste, screen printable

Sinonimo/i:

Greatcell Solar PT1 platinum paste, Pt paste, conductive paste

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(1)

About This Item

Numero MDL:
MFCD00011179
Codice UNSPSC:
12352103
ID PubChem:
329768276
NACRES:
NA.23

Forma fisica

paste (Amber)

Viscosità

2500-4500 mPa.s (Analysis carried out at 20°C with 20mm 4 degree cone/plate; 40 s-1)

Temperatura di conservazione

2-8°C

InChI

1S/Pt
BASFCYQUMIYNBI-UHFFFAOYSA-N

Categorie correlate

Applicazioni

PT1 Platinum Paste can be used in applications that require a highly transparent layer with high electrocatalytic activity.

PT1 Platinum Paste is oil-based and formulated to be applied using a screen printer; providing films with excellent uniformity; performance and reproducibility; and can be used for DSSC polot production.

After drying; this paste must be fired at or above 420°C. This results in uniformly distributed platinum nanoclusters; providing good transparency and high catalytic activity for the electrochemical reduction of I3- to I-.


Suggested Mesh Screen: 100T

Note legali

Product of Greatcell Solar Materials Pty Ltd.
Greatcell Solar is a registered trademark of Greatcell Solar Materials Pty Ltd

Pittogrammi

Health hazardCorrosion
GHS08,GHS05

Avvertenze

Danger

Indicazioni di pericolo

H315,H317,H318,H334

Classi di pericolo

Eye Dam. 1 - Resp. Sens. 1 - Skin Irrit. 2 - Skin Sens. 1

Codice della classe di stoccaggio

10 - Combustible liquids

Classe di pericolosità dell'acqua (WGK)

WGK 1

Punto d’infiammabilità (°F)

194.0 °F

Punto d’infiammabilità (°C)

90 °C

Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number
MKCQ7891
MKCQ1714
MKCP0042
MKCK9527
MKCG2002

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Cerca un COA

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Articoli

Ruthenium-based dyes for Dye-sensitized Solar Cells

Dye-sensitized solar cells (DSCs) are 3rd generation solar cells combining the promise of high efficiency with low production costs.

Understanding and Successfully Applying Materials for Dye-Sensitized Solar Cells

While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm2.2

Advancements in the Fabrication of Integrated Organic Electronics

Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.

Nanoparticle-based Zinc Oxide Electron Transport Layers for Printed Organic Photodetectors

Recent progress in the area of solution-processed functional materials has led to the development of a variety of thin-film optoelectronic devices with significant promise in the industrial and consumer electronics fields.

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.