Passa al contenuto
Merck
Tutte le immagini(1)

Documenti fondamentali

735825

Sigma-Aldrich

Silver

greener alternative

conductive paste

Sinonimo/i:

Silver Paste DGP80 TESM8020

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali


About This Item

Formula condensata:
Ag
Numero CAS:
Peso molecolare:
107.87
Numero MDL:
Codice UNSPSC:
12352103
ID PubChem:
NACRES:
NA.23

Stato

paste (microparticles)

Caratteristiche più verdi

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

Concentrazione

≥75%

Resistività

1-3 * 10^-5 Ω-cm (conductive paste)
1.59 μΩ-cm, 20°C

Matrice

α-Terpineol

Dimensione particelle

200 nm (80%)
<5 nm (20%)

Viscosità

100,000-300,000 cP, 0.4 rpm(25 °C, Brookfield)

P. ebollizione

2212 °C (lit.)

Punto di fusione

960 °C (lit.)

Temp. transizione

curing temperature 120-150 °C (30-60 min)

Densità

10.49 g/cm3 (lit.)

Categoria alternativa più verde

Temperatura di conservazione

2-8°C

Stringa SMILE

[Ag]

InChI

1S/Ag
BQCADISMDOOEFD-UHFFFAOYSA-N

Descrizione generale

Dispersion

Recommended washing solvent = polar solvent (Ethanol, IPA, Methanol, etc)

Recommended substrates = ITO film & glass, plastic film
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". 3D printable inks help to design and print more complex designs with minimum waste and it is environmentally friendly. Click here for more information.

Applicazioni

Silver conductive paste (Ag) can be used as an adhesive which can be used on indium tin oxide (ITO) for a variety of electronic applications. It can also be used as an interdigitated electrode (IDE) for gas sensors.
This product can be used in material extrusion 3D printing technique.

Note legali

Product of ANP, Inc.

Pittogrammi

CorrosionEnvironment

Avvertenze

Danger

Indicazioni di pericolo

Classi di pericolo

Aquatic Acute 1 - Aquatic Chronic 1 - Eye Dam. 1 - Skin Irrit. 2

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 3

Punto d’infiammabilità (°F)

205.0 °F

Punto d’infiammabilità (°C)

96.1 °C


Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 5

1 of 5

Physical properties of vacuum evaporated CdTe thin films with post-deposition thermal annealing
Chander S and Dhaka MS
Physica E: Low-Dimensional Systems and Nanostructures, 73, 35-39 (2015)
Structural transformations of mechanically alloyed polycrystalline YMnO 3-based material for gas sensing application
Abdullah NH, et al.
Journal of the Australasian Ceramic Society, 18(8), 1-12 (2019)
A Hydrogen Gas Sensor Based on TiO2 Nanoparticles on Alumina Substrate
Mohd Chachuli S, et al.
Sensors, 18(8), 2483-2483 (2018)
Optimization of physical properties of vacuum evaporated CdTe thin films with the application of thermal treatment for solar cells
Chander S and Dhaka MS
Materials Science in Semiconductor Processing, 40, 708-712 (2015)
Rui Wang et al.
Journal of nanoscience and nanotechnology, 13(6), 3851-3854 (2013-07-19)
The present studies reveal that silver nanoparticles (AgNPs) can induce apoptosis and enhance radio-sensitivity on cancer cells. In this paper, we mainly investigated the effect of AgNPs on rat glioma C6 cells upon the combination treatment of hyperthermia treatment (HTT).

Articoli

Nanostructured Materials Through Ultrasonic Spray Pyrolysis

While dye sensitization as the basis for color photography has been accepted for a very long time,1 attempts to use this principle for the conversion of solar light to electricity generally had resulted only in very low photocurrents, below 100 nA/cm2.2

Advances in materials have often been led by the development of new synthetic methods that provide control over size, morphology and structure. The preparation of materials in a scalable and continuous manner is critical when development moves beyond lab-scale quantities.

Recent progress in the area of solution-processed functional materials has led to the development of a variety of thin-film optoelectronic devices with significant promise in the industrial and consumer electronics fields.

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.