70253
Sepiolite
powder
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Prodotti consigliati
Stato
powder
Livello qualitativo
Concentrazione
~13% Mg
Perdita
≤10% loss on drying
Stringa SMILE
O.[Mg++].[Mg++].O[Si]([O-])=O.O[Si]([O-])=O.[O-][Si]([O-])=O
InChI
1S/2Mg.2HO3Si.O3Si.H2O/c;;3*1-4(2)3;/h;;2*1H;;1H2/q2*+2;2*-1;-2;
TUKQLEWOUPCTOS-UHFFFAOYSA-N
Descrizione generale
Sepiolite is a hydrated magnesium silicate that belongs to the class of sepiolite-palygorskite. Its properties include high absorption capacity and good rheological behavior.
Applicazioni
Sepiolites can be used as absorbents for potential applications in catalytic systems and wastewater treatment.
Codice della classe di stoccaggio
11 - Combustible Solids
Classe di pericolosità dell'acqua (WGK)
nwg
Punto d’infiammabilità (°F)
Not applicable
Punto d’infiammabilità (°C)
Not applicable
Dispositivi di protezione individuale
Eyeshields, Gloves, type N95 (US)
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Adsorption kinetics and thermodynamics of an anionic dye onto sepiolite
Microporous and Mesoporous Materials : The Official Journal of the International Zeolite Association, 101(3), 388-396 (2007)
Experimental and Atomic Modeling of the Adsorption of Acid Azo Dye 57 to Sepiolite
Clays and Clay Minerals, 66(5), 426-437 (2018)
Thermal and morphological characterisation of organically modified sepiolite
Microporous and Mesoporous Materials : The Official Journal of the International Zeolite Association, 107(1-2), 161-168 (2008)
Chemosphere, 90(2), 548-555 (2012-09-22)
Mercapto functionalized sepiolite (MSEP) was prepared by nanotexturization method and applied for the sorption of Pb(2+) from aqueous solution. These samples before and after sorption were characterized through XRD, FT-IR, (29)Si and (13)C CP/MAS NMR and XPS. The sorption behaviors
Environmental science & technology, 46(9), 5040-5048 (2012-03-27)
The photocatalytic efficiency of TiO(2)-SiMgO(x) plates to oxidize H(2)S was first evaluated in a flat laboratory reactor with 50 mL min(-1) synthetic air containing 100 ppm H(2)S in the presence of humidity. The use of the photocatalyst-adsorbent hybrid material enhanced
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.