Passa al contenuto
Merck
Tutte le immagini(1)

Key Documents

View All Documentation

634875

Sigma-Aldrich

Aluminum oxide

single crystal substrate, <0001>

Sinonimo/i:

Sapphire, Alumina

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(1)

About This Item

Formula condensata:
Al2O3
Numero CAS:
1344-28-1
Peso molecolare:
101.96
Numero CE:
215-691-6
Numero MDL:
MFCD00003424
Codice UNSPSC:
12352303
eCl@ss:
38120402
ID PubChem:
24882698
NACRES:
NA.23

Descrizione

Crystallographic D spacing ((0001) - c plane: 2.165 Angstrom)
Crystallographic D spacing ((1011) - s plane: 1.961 Angstrom)
Crystallographic D spacing ((1040) - m plane: 1.375 Angstrom)
Crystallographic D spacing ((1102) - r plane: 1.740 Angstrom)
Crystallographic D spacing ((1120) - a plane: 2.379 Angstrom)
Crystallographic D spacing ((1123) - n plane: 1.147 Angstrom)
single side polished

Livello qualitativo

100

Forma fisica

single crystal substrate

Durezza

9 mohs

Lungh. × largh. × spess.

10 mm × 10 mm × 0.5 mm

Punto di fusione

2040 °C (lit.)

Caratteristiche del semiconduttore

<0001>

Stringa SMILE

O=[Al]O[Al]=O

InChI

1S/2Al.3O
TWNQGVIAIRXVLR-UHFFFAOYSA-N

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Caratteristiche e vantaggi

Common substrate for III-V nitrides as well as many other epitaxial films.

Proprietà fisiche

thermal expansion = 7.5 × 10-6 /°C; specific heat = 0.10 cal/°C; thermal conductivity = 46.06 @ 0 °C, 25.12 @ 100 °C, 12.56 @ 400 °C (W/m,K); dielectric constant = ~9.4 @ 300 K at A axis, ~11.58 @ C axis; loss tangent at 10 GHz < 2 × 10-5 at A axis, 5 × 10-6 at C axis

Stato fisico

Crystalline, hexagonal (a = 4.758 Å, c = 12.992)

Codice della classe di stoccaggio

13 - Non Combustible Solids

Classe di pericolosità dell'acqua (WGK)

nwg

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Dispositivi di protezione individuale

Eyeshields, Gloves, type N95 (US)

Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number
MKCL0052
MKCJ8563
MKCG7943
MKCF9404
MKCD1697

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Cerca un COA

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

G Siddiqi et al.
Dalton transactions (Cambridge, England : 2003), 44(32), 14349-14353 (2015-07-23)
A simple one-step and gram-scale synthesis of [Au5Mes5] from AuCl3 was developed, and this molecular precursor was used to generate Au nanoparticles on SiO2 and Al2O3. While [Au5Mes5] does not react with surface silanols and is only physisorbed, its incipient
Joohoon Kang et al.
ACS nano, 9(4), 3596-3604 (2015-03-19)
Solution dispersions of two-dimensional (2D) black phosphorus (BP)--often referred to as phosphorene--are achieved by solvent exfoliation. These pristine, electronic-grade BP dispersions are produced with anhydrous organic solvents in a sealed-tip ultrasonication system, which circumvents BP degradation that would otherwise occur
Chien-Chih Lin et al.
Nanoscale, 5(17), 8090-8097 (2013-07-25)
We demonstrated a promising route for enhancing temperature sensitivity, improving saturation voltage, and reducing power consumption of the MOS(p) tunneling temperature sensors by introducing ultrathin Al2O3 into the dielectric stacks. Detailed illustrations of the working mechanism and device concept are
Jaakko Akola et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(25), 10129-10134 (2013-06-01)
Glass formation in the CaO-Al2O3 system represents an important phenomenon because it does not contain typical network-forming cations. We have produced structural models of CaO-Al2O3 glasses using combined density functional theory-reverse Monte Carlo simulations and obtained structures that reproduce experiments
Colin J Ingham et al.
Biotechnology advances, 30(5), 1089-1099 (2011-08-23)
Porous aluminum oxide (PAO) is a ceramic formed by an anodization process of pure aluminum that enables the controllable assembly of exceptionally dense and regular nanopores in a planar membrane. As a consequence, PAO has a high porosity, nanopores with
Visualizza tutti i documenti correlati

Articoli

Dye-Sensitized and Perovskite Solar Cells: Interface Engineering by Atomic Layer Deposition

Since the demonstration of the first practical solar cell 60 years ago, research on novel materials, improved solar cell design and structure, and innovative manufacturing processes have all contributed to a continuous increase in the efficiency of photovoltaic (PV) devices.

Building and Engineering Micro/Nano Architectures of Single-Walled Carbon Nanotubes for Electronic Applications

Building and Engineering Micro/Nano Architectures of Single-Walled Carbon Nanotubes for Electronic Applications

FePt Nanogranular films for high density heat-assisted magnetic recording

A hard disk drive (HDD) is a data storage device that stores digital information by magnetizing nanosized magnets on flat disks and retrieves data by sensing the resulting magnetic field.

Atomic Layer Deposition of Nanomaterials for Li-Ion Batteries, Fuel Cells, and Solar Cells

Nanomaterials are considered a route to the innovations required for large-scale implementation of renewable energy technologies in society to make our life sustainable.

Vedi tutto

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.