Passa al contenuto
Merck
Tutte le immagini(1)

Key Documents

View All Documentation

262897

Sigma-Aldrich

Tantalum

foil, thickness 0.25 mm, ≥99.9% trace metals basis

Sinonimo/i:

Ta

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(1)

About This Item

Formula empirica (notazione di Hill):
Ta
Numero CAS:
7440-25-7
Peso molecolare:
180.95
Numero CE:
231-135-5
Numero MDL:
MFCD00011252
Codice UNSPSC:
12141741
ID PubChem:
24855933
NACRES:
NA.23

Tensione di vapore

<0.01 mmHg ( 537.2 °C)

Livello qualitativo

100

Saggio

≥99.9% trace metals basis

Forma fisica

foil

Temp. autoaccensione

572 °F

Resistività

13.5 μΩ-cm, 20°C

Spessore

0.25 mm

P. eboll.

5425 °C (lit.)

Punto di fusione

2996 °C (lit.)

Densità

16.69 g/cm3 (lit.)

Stringa SMILE

[Ta]

InChI

1S/Ta
GUVRBAGPIYLISA-UHFFFAOYSA-N

Descrizione generale

The structure of tantalum is body centered cubic (BCC) metal. It is a refractory metal; stable up to very high temperatures. Tantalum is ductile at room temperature and moderately ductile at cryogenic temperatures. Compton profile of highly pure thin elemental foil of tantalum was investigated using IGP type coaxial photon detector.1

Quantità

50x50 mm (approximately 10.4 g)
100x100 mm (approximately 41.6 g)

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

nwg

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Dispositivi di protezione individuale

Eyeshields, Gloves, type N95 (US)

Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number
MKCQ5412
MKCQ3822
MKCN1346
MKCL7867
MKCJ6289

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Cerca un COA

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 6

1 of 6

Tantalum foil, 100x100mm, thickness 0.100mm, annealed, 99.9%

GF76534500

Tantalum

Tantalum

Sigma-Aldrich

545007

Tantalum

Tantalum powder 98+

Sigma-Aldrich

1.12349

Tantalum powder

Tantalum powder, &#8722;325&#160;mesh, 99.9% trace metals basis

Sigma-Aldrich

262846

Tantalum

Niobium foil, thickness 0.25&#160;mm, 99.8% trace metals basis

Sigma-Aldrich

262781

Niobium

Silicon wafer (single side polished), &#60;111&#62;, N-type, contains no dopant, diam. × thickness 2&#160;in. × 0.5&#160;mm

Sigma-Aldrich

647101

Silicon

The Morphology of Tensile Failure in Tantalum
Boyce BL, et al.
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(10), 4567-4580 (2013)
Orbital ultrasound in the selective screening of a dural-cavernous sinus fistula.
Hamid Shokoohi et al.
European journal of emergency medicine : official journal of the European Society for Emergency Medicine, 20(2), 137-139 (2013-02-26)
Thomas Larzon et al.
Vascular, 21(2), 87-91 (2013-03-20)
Control of back bleeding from the hypogastric artery into the aneurysm after endovascular aneurysm repair (EVAR) of a ruptured aorto-iliac aneurysm may be necessary in order to avoid a type II endoleak. It is an emergency situation and selective catheterization
Stuart A Callary et al.
Clinical orthopaedics and related research, 471(7), 2238-2244 (2013-01-22)
One cross-linked polyethylene (XLPE) liner is manufactured using a lower dose of radiation, 5 Mrad, which may result in less cross-linking. The reported in vivo wear rate of this XLPE liner in patients undergoing THA has varied, and has included
Shi-Hua Yu et al.
Water environment research : a research publication of the Water Environment Federation, 84(12), 2115-2122 (2013-01-25)
Tantalum hydroxide exhibits the ability for the removal of phosphate from aqueous solution. The kinetic study, adsorption isotherm, thermodynamic study, desorption, and foreign anions effect were examined in batch experiments. The kinetic process was very well described by a pseudo-second-order
Visualizza tutti i documenti correlati

Articoli

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.