246816
1,6-Hexanediol diacrylate
technical grade, 80%
Sinonimo/i:
Hexamethylene glycol diacrylate, Hexane-1,6-diyl diacrylate, HDODA
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Formula condensata:
[H2C=CHCO2(CH2)3-]2
Numero CAS:
Peso molecolare:
226.27
Numero CE:
Numero MDL:
Codice UNSPSC:
12162002
ID PubChem:
NACRES:
NA.23
Prodotti consigliati
Grado
technical grade
Densità del vapore
>1 (vs air)
Tensione di vapore
<0.01 mmHg ( 20 °C)
Saggio
80%
Forma fisica
liquid
contiene
100 ppm monomethyl ether hydroquinone as inhibitor
Indice di rifrazione
n20/D 1.456 (lit.)
Densità
1.01 g/mL at 25 °C (lit.)
Stringa SMILE
C=CC(=O)OCCCCCCOC(=O)C=C
InChI
1S/C12H18O4/c1-3-11(13)15-9-7-5-6-8-10-16-12(14)4-2/h3-4H,1-2,5-10H2
FIHBHSQYSYVZQE-UHFFFAOYSA-N
Categorie correlate
Descrizione generale
1,6-Hexanediol diacrylate is a di-functional monomer commonly used in the polymer industry for producing various types of polymers. It is a viscous liquid, that is often used as a crosslinking agent in radical polymerization reactions. Additionally, it also finds use in various fields such as coatings, adhesives, 3D printing, medical devices, and textiles due to its excellent polymerization properties and versatility.
Applicazioni
1,6-Hexanediol diacrylate can be used as:
- A monomer for the synthesis of poly(1,6-hexanediol diacrylate) (PHDA)-based polymer microspheres and bifunctional microcapsules. The resulting PHDA-based polymer embedded with TiO2 nanoparticles finds uses in various potential applications in fields such as sensing, drug delivery, and photonics.
- A sensitizer in the UV-curable inks commonly used in the printing industry.
- A cross-linking agent in conjunction with a photocatalytic system to modify cellulose material. The resulting crosslinked cellulose material finds uses in various potential applications such as paper manufacturing, textiles, and biomedical devices.
- A monomer in the synthesis of polyurethane acrylate (PUA) which is used to produce polymer electrolytes for use in lithium batteries.
- A resin (copolymer of 1,6-hexanediol diacrylate and styrene) by suspension polymerization, which is applicable in the preparation of hydrophobic peptide sequences.
- Monodispersed poly(HDDA)/TiO2 microspheres, applicable in the degradation of methylene blue.
Avvertenze
Warning
Indicazioni di pericolo
Consigli di prudenza
Classi di pericolo
Aquatic Acute 1 - Aquatic Chronic 2 - Eye Irrit. 2 - Skin Irrit. 2 - Skin Sens. 1
Codice della classe di stoccaggio
10 - Combustible liquids
Classe di pericolosità dell'acqua (WGK)
WGK 2
Punto d’infiammabilità (°F)
235.4 °F - closed cup
Punto d’infiammabilità (°C)
113 °C - closed cup
Dispositivi di protezione individuale
Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter
Scegli una delle versioni più recenti:
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
I clienti hanno visto anche
Dinara Zhalmuratova et al.
ACS applied materials & interfaces, 11(36), 33323-33335 (2019-08-30)
An ex vivo heart perfusion device preserves the donor heart in a warm beating state during transfer between extraction and implantation surgeries. One of the current challenges includes the use of rigid and noncompliant plastic tubes, which causes injuries to
Julia Kloeckner et al.
Bioconjugate chemistry, 17(5), 1339-1345 (2006-09-21)
Two biodegradable polycations based on hexanediol diacrylate linked oligoethylenimine (OEI) were synthesized by applying different reaction temperatures, 20 degrees C (LT-OEI-HD) and 60 degrees C (HT-OEI-HD). Their structural properties were analyzed by NMR, FTIR, and SEC/MALLS (size exclusion chromatography coupled
J R Nethercott et al.
British journal of industrial medicine, 40(3), 241-250 (1983-08-01)
Seven workers exposed to ultraviolet printing inks developed contact dermatitis. Six cases were allergic and one irritant. A urethane acrylate resin accounted for five cases of sensitisation, one of which was also sensitive to pentaerythritol triacrylate and another also to
Luca Ferrari et al.
Sensors (Basel, Switzerland), 13(1), 484-499 (2013-01-01)
The design, development and performance evaluation of a fluorescence-based pH sensor for on-line measurements is presented. The pKa of the sensing element has been calculated to be 7.9, thus the sensor is suitable for measurement of near neutral solutions. The
Jung-Bin Lee et al.
Materials (Basel, Switzerland), 11(9) (2018-09-16)
This study demonstrates the usefulness of the lithography-based ceramic 3-dimensional printing technique with a specifically designed top-down process for the production of porous calcium phosphate (CaP) ceramic scaffolds with tailored pore orientations and mechanical properties. The processing parameters including the
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.