WPB01348WA

Whirl-Pak^® Homogenizer Blender Filter Bag

710 mL capacity(24 oz)

• Sinônimo(s): filtered Blender bag, filtered homogenizer bag
• Código UNSPSC: 24111500
• NACRES: NB.35

Propriedades

• esterilidade: sterile
• Características: filter 330 μm
• embalagem: pkg of 250 ea
• fabricante/nome comercial: Nasco B01348WA
• L × C: 6 in. × 9 in. , 15 x 23 cm
• capacidade: 710 mL × 24 oz ; 710 mL capacity(24 oz)
• espessura: 4 mil , 0.102 mm
• aplicação(ões): sample preparation
• compatibilidade: for use with Whirl-pak^® homogenizer

Descrição

Descrição geral

These special bags contain a third middle layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogenizer blender. Bags feature a filter layer of finely perforated polyethylene, to separate the liquid and solids, allowing for easy pipetting of the sample. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side.

Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F, 82° C. Bags can be frozen to any temperature, even liquid nitrogen - careful handling required after freezing. All bags are sterilized after manufacturing.

Informações legais

Whirl-pak is a registered trademark of The Aristotle Corporation