Pular para o conteúdo
Merck
Todas as fotos(2)

Documentos Principais

Visualizar Toda a Documentação

703192

Sigma-Aldrich

Indium tin oxide coated glass slide, square

surface resistivity 8-12 Ω/sq

Sinônimo(s):

ITO, ITO coated slide, square

Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(2)

About This Item

Fórmula linear:
In2O3 · (SnO2)x
Número CAS:
50926-11-9
Número MDL:
MFCD00171662
Código UNSPSC:
12352103
ID de substância PubChem:
329762437
NACRES:
NA.23

descrição

slide

resistividade da superfície

8-12 Ω/sq

C × L × espessura

25 mm × 25 mm × 1.1 mm

transmitância

84% (nominal at 550nm)

índice de refração

n20/D 1.517

cadeia de caracteres SMILES

O=[Sn]=O.O=[In]O[In]=O

InChI

1S/2In.5O.Sn

chave InChI

LNNWKAUHKIHCKO-UHFFFAOYSA-N

Procurando produtos similares? Visita Guia de comparação de produtos

Descrição geral

Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films.
substrate: unpolished float glass, SiO2 passivated (200-300 Å)

Aplicação

ITO glass slides were used as a substrate for fabricating polymer solar cells based on blends of polymeric semiconductors and organic light emitting diodes (OLEDS). ITO substrates can also be used to design transparent heater arrays by etching the surface of the substrate by a printing tool. ITO cover slides may be used for closed digital microfluidic devices and as transparent electrodes in display and other optoelectronic devices.Some other probable uses that has been reported are:
  • Eumelanin samples prepared on ITO covered glass substrates.
  • Interface windows of the liquid cell for optical beam deflection (OBD) sensing contains a 20-nm-thick indium tin oxide film.
  • Mesoporous TiO2 films were formed on ITO conductive glasses.

propriedades físicas

Thickness of ITO coating is 1,200-1,600 Å

Código de classe de armazenamento

13 - Non Combustible Solids

Classe de risco de água (WGK)

WGK 3

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Equipamento de proteção individual

dust mask type N95 (US), Eyeshields, Gloves

Escolha uma das versões mais recentes:

Certificados de análise (COA)

Lot/Batch Number
MKCQ5287
MKCP9044
MKCP3243
MKCN7687
MKCN1843

Não está vendo a versão correta?

Se precisar de uma versão específica, você pode procurar um certificado específico pelo número do lote ou da remessa.

Pesquise por COA

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Keith A Brown et al.
Proceedings of the National Academy of Sciences of the United States of America, 110(32), 12921-12924 (2013-07-19)
Scanning probe lithography (SPL) is a promising candidate approach for desktop nanofabrication, but trade-offs in throughput, cost, and resolution have limited its application. The recent development of cantilever-free scanning probe arrays has allowed researchers to define nanoscale patterns in a
Myungjae Yang et al.
Small (Weinheim an der Bergstrasse, Germany), 14(25), e1800885-e1800885 (2018-05-29)
A method is developed to directly map nanoscale "noise-source switching" phenomena during the optoelectronic switching of phase-separated polymer nanocomposites of tetrathiafulvalene (TTF) and phenyl-C61 -butyric acid methyl ester (PCBM) molecules dispersed in a polystyrene (PS) matrix. In the method, electrical
Online coupling of digital microfluidic devices with mass spectrometry detection using an eductor with electrospray ionization.
Baker CA and Roper MG
Analytical Chemistry, 2955-2960 (2012)
Hanaul Noh et al.
Beilstein journal of nanotechnology, 8, 579-589 (2017-04-07)
Organic photovoltaic systems comprising donor polymers and acceptor fullerene derivatives are attractive for inexpensive energy harvesting. Extensive research on polymer solar cells has provided insight into the factors governing device-level efficiency and stability. However, the detailed investigation of nanoscale structures
Optical Fiber Refractometers based on Indium Tin Oxide Coatings with Response in the Visible Spectral Region
Zamarreno CR, et al.
Procedia Engineering, 25, 499-502 (2011)
Exibir todos os documentos relacionados

Artigos

Organic Semiconductor Laser Materials

Organic Semiconductor Laser Materials

Organic and Hybrid Electronics in Optical Analytical Applications

Professor Shinar (Iowa State University, USA) summarizes the developments of a variety of sensor configurations based on organic and hybrid electronics, as low-cost, disposable, non-invasive, wearable bioelectronics for healthcare.

Inverted Organic Photovoltaic Devices Using Zinc Oxide Nanocomposites as Electron Transporting Layer Materials

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

Titania Nanotubes: Synthesis and Applications

Electronically, it behaves as a wide band gap (3.2 eV) semiconductor and exhibits memristor properties.2 Optically, TiO2 has high opacity with a very high refractive index3 (>2.4), and it exhibits strong absorbance in the UV range.

Ver tudo

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica