Pular para o conteúdo
Merck
Todas as fotos(1)

Key Documents

Outros documentos

639303

Sigma-Aldrich

Indium tin oxide coated PET

surface resistivity 60 Ω/sq, L × W × thickness 1 ft × 1 ft × 5 mil, sheet

Sinônimo(s):

ITO-PET, Polyethylene terephthalate film, ITO coated

Faça loginpara ver os preços organizacionais e de contrato
Todas as fotos(1)

About This Item

Fórmula linear:
In2O3 · (SnO2)x
Número MDL:
MFCD00171662
Código UNSPSC:
32131014
ID de substância PubChem:
329759912
NACRES:
NA.23

forma

sheet

resistividade da superfície

60 Ω/sq

C × L × espessura

1 ft × 1 ft × 5 mil

transmitância

550 nm, >78%

cadeia de caracteres SMILES

O=[In]O[In]=O.O=[Sn]=O

InChI

1S/2In.5O.Sn

chave InChI

LNNWKAUHKIHCKO-UHFFFAOYSA-N

Procurando produtos similares? Visita Guia de comparação de produtos

Descrição geral

Indium tin oxide films are inherently brittle in nature. To overcome this, ITO is coated with transparent conductive polymers or nanomaterial. Indium tin oxide coated polyethylene terephthalate (PET) film is optically transparent and electrically conductive.The ITO coating is protected by a thin, transparent film, that can be easily peeled off.

Aplicação

A radius of curvature of up to 75 mm will not damage the ITO coating.
Micro mechanical properties of ITO-PET were investigated. Electrical resistance of ITO-PET increases in case of degradation. ITO-PET was used as an electrode in the electrochemical measurements in a study of biosensors composed of polymer brushes. ITO microelectrodes were studied as an “electronic tongue” for analyte recognition. The sheet resistance of ITO, after bending to a radius of 25 mm was investigated, for its use for flexible optical devices. Giant unilamellar vesicle (GUVs) were produced on ITO coated glass slides by drying droplets of the FhuA proteoliposomes.

Características e benefícios

The polyester film products comprise sputtered ITO, and exhibit transmittance and resistance characteristics similar to those of the glass substrates.

propriedades físicas

Thickness of ITO coating is 1300 Å

Quantidade

5 ea = 5 x 1ft x 1ft

Código de classe de armazenamento

13 - Non Combustible Solids

Classe de risco de água (WGK)

WGK 3

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Equipamento de proteção individual

dust mask type N95 (US), Eyeshields, Gloves

Certificados de análise (COA)

Busque Certificados de análise (COA) digitando o Número do Lote do produto. Os números de lote e remessa podem ser encontrados no rótulo de um produto após a palavra “Lot” ou “Batch”.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Design of red, green, blue transparent electrodes for flexible optical devices
Kim S, et al.
Optics Express, 22(105), A1257-A1269 (2014)
A Novel Method to Couple Electrophysiological Measurements and Fluorescence Imaging of Suspended Lipid Membranes: The Example of T5 Bacteriophage DNA Ejection
Chiaruttini N, et al.
PLoS ONE, 8(12), 84376-84376 (2013)
Stimuli-Responsive Biointerface Based on Polymer Brushes for Glucose Detection
Crulhas BP, et al.
Electroanalysis, 26(4), 815-822 (2014)
Voltammetry of Micro-Liter Electrolyte Samples on ITO Microelectrodes for Analyte Recognition.
Jenabi A, et al.
Key Engineering Materials, 605, 601- 604 (2014)
Understanding the mechanisms that change the conductivity of damaged ITO-coated polymeric films: A micro-mechanical investigation
Saleh MN, et al.
Solar Energy Mat. and Solar Cells, 130, 199-207 (2014)
Exibir todos os documentos relacionados

Artigos

Organic Semiconductor Laser Materials

Organic Semiconductor Laser Materials

Inverted Organic Photovoltaic Devices Using Zinc Oxide Nanocomposites as Electron Transporting Layer Materials

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

Graphene-Based Transparent Conductive Electrodes

A transparent conductive electrode (TCE) is an essential component of various optoelectronic devices such as solar cells, liquid-crystal displays (LCD), light-emitting diodes (LED), and touch screens.

Nanoparticle-based Zinc Oxide Electron Transport Layers for Printed Organic Photodetectors

Recent progress in the area of solution-processed functional materials has led to the development of a variety of thin-film optoelectronic devices with significant promise in the industrial and consumer electronics fields.

Ver tudo

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica