Pular para o conteúdo
Merck
Todas as fotos(3)

Key Documents

204455

Sigma-Aldrich

Strontium carbonate

99.995% trace metals basis

Sinônimo(s):

Strontianite

Faça loginpara ver os preços organizacionais e de contrato


About This Item

Fórmula linear:
SrCO3
Número CAS:
Peso molecular:
147.63
Número CE:
Número MDL:
Código UNSPSC:
12352302
eCl@ss:
38020224
ID de substância PubChem:
NACRES:
NA.23

Nível de qualidade

Ensaio

99.995% trace metals basis

forma

powder and chunks

Impurezas

≤55.0 ppm Trace Metal Analysis

pf

1494 °C (lit.)

solubilidade

dilute aqueous acid: slightly soluble(lit.)

densidade

3.7 g/mL at 25 °C (lit.)

cadeia de caracteres SMILES

[Sr++].[O-]C([O-])=O

InChI

1S/CH2O3.Sr/c2-1(3)4;/h(H2,2,3,4);/q;+2/p-2

chave InChI

LEDMRZGFZIAGGB-UHFFFAOYSA-L

Procurando produtos similares? Visita Guia de comparação de produtos

Aplicação

  • Strontium carbonate: Extensively used in the production of glazes in ceramics, where it acts as a flux and introduces strontium into the glaze for improved finish and durability. It is also crucial in the manufacture of ferrite magnets, providing the necessary strontium content to enhance magnetic properties. Additionally, its role in pyrotechnics is to contribute to the vibrant red hues seen in fireworks displays (Sigma-Aldrich, CAS 1633-05-2).

Código de classe de armazenamento

13 - Non Combustible Solids

Classe de risco de água (WGK)

nwg

Ponto de fulgor (°F)

Not applicable

Ponto de fulgor (°C)

Not applicable

Equipamento de proteção individual

Eyeshields, Gloves, type N95 (US)


Escolha uma das versões mais recentes:

Certificados de análise (COA)

Lot/Batch Number

Não está vendo a versão correta?

Se precisar de uma versão específica, você pode procurar um certificado específico pelo número do lote ou da remessa.

Já possui este produto?

Encontre a documentação dos produtos que você adquiriu recentemente na biblioteca de documentos.

Visite a Biblioteca de Documentos

Os clientes também visualizaram

M Sadeghi et al.
Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 67(1), 7-10 (2008-10-22)
A novel production technique of yttrium-86 based on bombardment of deposited strontium carbonate was investigated. (86)Y was produced via proton-induced reactions on SrCO(3) target that was prepared by the sedimentation method. Production yield of 0.37mCi/microAh at 30 microA was measured
K Sahner et al.
Physical chemistry chemical physics : PCCP, 9(5), 635-642 (2007-01-24)
In the scope of the present contribution, perovskite SrTi(1-x)Fe(x)O(3-delta) was investigated as a model material for conductometric hydrocarbon sensing at intermediate temperatures between 350 and 450 degrees C. To explain the observations made during sensor optimization in a quantitative way
M Sadeghi et al.
Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine, 67(11), 2029-2032 (2008-12-27)
Strontium carbonate deposition on copper substrate was carried out by the sedimentation method in order to produce yttrium-86. Natural strontium carbonate thick layer was prepared with 480 mg SrCO(3), 220 mg ethyl cellulose, and 7.5 mL acetone. This optimum condition
Kai Qiu et al.
Biomaterials, 27(8), 1277-1286 (2005-09-07)
Preparation, characterization and cellular biocompatibility study of a series of calcium polyphosphate containing 0-100 mol% of Ca2+ replaced by Sr2+ were reported. The osteoblastic ROS17/2.8 cell line was used and seeded on the strontium-doped calcium polyphosphate (SCPP) scaffolds to estimate
Guilhem Romieu et al.
Acta biomaterialia, 6(8), 3208-3215 (2010-02-11)
Sterile calcium hydrogenophosphate dihydrate (DCPD) (CaHPO(4).2H(2)O), calcium oxide and strontium carbonate powders were mixed in various liquid phases. Among these, ammonium phosphate buffer (0.75 M, pH 6.9) led to a novel strontium-containing calcium phosphate cement. At a 6/2.5/1.5 M ratio

Artigos

The prevailing strategies for heat and electric-power production that rely on fossil and fission fuels are having a negative impact on the environment and on our living conditions.

Nossa equipe de cientistas tem experiência em todas as áreas de pesquisa, incluindo Life Sciences, ciência de materiais, síntese química, cromatografia, química analítica e muitas outras.

Entre em contato com a assistência técnica