Low Pressure Liquid Chromatography

Low-pressure liquid chromatography (LPLC) is an analytical technique that uses low pressure to drive a mobile phase through a column containing a stationary phase, separating complex mixtures by differential partitioning. Originally performed with open columns that used gravity to move the sample through the packing bed, it is also known as "open column liquid chromatography. The different LPLC modes allow for the precise and efficient purification of compounds by separating them based on their chemical properties, such as size, charge, or affinity.

It is mostly used for studying biomolecules like proteins, peptides, and monoclonal antibodies due to its non-destructive preparative nature. Typically, LPLC makes it possible to keep the sample for further studies. LPLC offers additional benefits such as a simple design, strong siphon capabilities, and modest instrumentation requirements including detectors, low-pressure pumps, and fraction collectors. Its versatility makes it indispensable across pharmaceuticals, biotechnology, food and beverage, environmental monitoring, and research sectors. Moreover, by using lower pressures and using less solvent, LPLC complies with the principles of green chemistry.

Featured Categories

HPLC Columns

Achieve precise separations with our extensive HPLC column collection. Enhance retention, resolution, and selectivity.

Shop Products

LPLC Media & Accesories

Explore our LPLC product range: columns, adsorbents, resins, separation media, and accessories tailored to your unique application needs.

Shop Products

HPLC Buffers

Choose the right HPLC grade buffers for precise reversed-phase chromatography. Explore our selection now.

Shop Products

Milli-Q^® Benchtop Lab Water Purification Systems

Milli-Q^® systems offer innovative water purification technologies engineered to support lab research needs, sustainability goals, and other major requirements.

Shop Products

Overview

Related Articles & Protocols

Support

Adsorption Chromatography

Also known as liquid-solid chromatography, adsorption chromatography retains chemicals by adsorbing and desorbing them at the surface of the support, stationary phase. The adsorbent forms the stationary phase, and the solute binds to it by van der Waal forces and steric interactions. Because adsorption sites are usually on the outer surface of the stationary phase, relatively tiny particles are used as the stationary phase. Silica, alumina, charcoal, Florisil, polyamides, celite, and diatomaceous Earth are the commonly used adsorbents.

Partition Chromatography

Partition chromatography separates by distributing the components between two immiscible liquids. One is the liquid mobile phase while other is the liquid held stationary on a solid support. Materials used a solid support include silica gel, diatomaceous earth, cellulose, polytetrafluoroethylene (PTFE), and polystyrene. The inert solid support provides a large surface area for the liquid stationary phase.

Affinity Chromatography

Affinity chromatography separates constituents by selective and reversible interactions, such as antibody-antigen, enzyme-substrate, or hormone-receptor pairs, with one of the interacting agents as the stationary phase. The "affinity ligand" is the interacting species immobilized on solid support such as acrylic beads, agarose, and Toyopearl resins, and it serves as the stationary phase for the affinity column.

Gel Filtration Chromatography

Also known as size exclusion chromatography, it separates molecules of different size such as proteins of varying sizes and oligomeric forms. The stationary phase is a resin made up of cross-linked matrix of beads containing pores of a specific size. Gel filtration columns contain beads of polyacrylamide, agarose, dextran, or a mix of any of these. It isolates smaller analytes by providing partial or full access to the pore volume within the column packing particles.

Hydrophobic Interaction Chromatography (HIC)

Hydrophobic interaction chromatography (HIC) separates biomolecules based on differences in their surface hydrophobicity. It is based on the interaction of non-polar hydrophobic groups linked to the column resin, such as butyl, octyl, or phenyl, with the hydrophobic groups on biomolecules. It is widely used to separate proteins while preserving their biological activity since it uses lesser denaturing conditions and matrices.

Ion Exchange Chromatography (IEX)

Ion exchange chromatography separates molecules based on differences in their net surface charges. The surface of the matrix, such as cellulose, silica, or styrene-divinylbenzene, is covalently linked to charged functional groups. The resin's immobilized ion exchange groups interact with molecules that have opposite charges. In cation exchange chromatography, positively charged species in the mobile phase bind to a negatively charged ion exchange resin. In anion exchange chromatography, negatively charged species in the mobile phase bind to the positive charges on the ion exchange resin.

Low-pressure Liquid Chromatography System

A low-pressure liquid chromatography (LPLC) system typically consists of a column filled with a stationary phase for separation, a pump to deliver the mobile phase through the column at controlled flow rates, and a detector to measure the eluent as it exits the column.
LPLC systems also feature an injection system for introducing the sample into the mobile phase stream, ensuring precise and reproducible sample introduction. Some setups include a fraction collector to gather separated components for further analysis.

Looking for More Specific Information?

Visit our document search for data sheets, certificates and technical documentation.

Find Documents

Related Resources

• Brochure: Resins Selection Guide

  This guide covers various chromatography methods including adsorption, affinity, gel filtration, hydrophobic interaction, and ion exchange chromatography.