52579-U
Supelclean™ PSA SPE Tube
bed wt. 500 mg, volume 6 mL, pk of 30
Synonym(s):
PSA SPE cartridge tube, 6 mL
About This Item
Recommended Products
material
PE frit (20 μm porosity)
polypropylene hardware
composition
bed wt., 500 mg
packaging
pk of 30
extent of labeling
8.4% C loading
3.3% N loading
technique(s)
solid phase extraction (SPE): suitable
surface area
500 m2/g
volume
6 mL
surface coverage
surface coverage 2.35 μmol/m2
matrix
silica gel base material (irregularly shaped)
matrix active group
ethylenediamine-N-propy bonding, polymerically bonded
particle size
50 μm
pore size
70 Å pore size
pKa
(1) 10.1, (2) 10.9
capacity
0.98-1.05 meq/g capacity
application(s)
food and beverages
separation technique
ion exchange
normal phase
Looking for similar products? Visit Product Comparison Guide
General description
Sample Matrix Compatibility: Organic or aqueous solutions
- Polymerically bonded, ethylenediamine-N-propyl phase that contains both primary and secondary amines
- A weak anion exchanger with a pKa of 10.1 and 10.9
- Similar to aminopropyl SPE phases (NH2) in terms of selectivity, but has a much higher capacity due to presence of secondary amine (0.98-1.05 meq/g)
- Strong affinity and high capacity for removing fatty acids, organic acids, and some polar pigments and sugars when conducting multi-residue pesticide analysis in foods
- Has been shown to significantly reduce matrix-enhancement effects encountered during the GC analysis of food products
- Tested for superior cleanliness using GC-FID and GC-MS
- Bidentate nature of ligand allows for chelation
Legal Information
signalword
Danger
hcodes
Hazard Classifications
Eye Dam. 1 - Skin Sens. 1B - STOT RE 2 Inhalation
target_organs
respiratory tract irritation
Storage Class
13 - Non Combustible Solids
wgk_germany
WGK 1
flash_point_f
Not applicable
flash_point_c
Not applicable
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Articles
SPE retention mechanism in this case is based on the electrostatic attraction of charged functional groups of the analyte(s) to oppositely charged functional groups on the sorbent.
Protocols
Retention occurs through polar interaction between the sorbent and analytes. Typical sample matrices that can be employed in normal-phase SPE include hydrocarbon or fatty oils diluted in a solvent like hexane, isooctane, chlorinated solvent, THF, diethyl ether, or ethyl acetate.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service