P3B030A10

Pellicon^® 3 Cassette with Biomax^® Membrane

30kDa, A Screen, 1.14 m2

• Synonym(s): Pellicon^® 3 Cassette with Biomax 30 kDa Membrane, A screen, 1.14 m²
• UNSPSC Code: 23151806
• eCl@ss: 32031623

Properties

• material: TPE seal; polyethersulfone ; polypropylene screen; stainless steel cap (for end; polypropylene-encapsulated)
• Quality Level: 400
• feature: holdup volume 134 mL (in feed channel)
• manufacturer/tradename: Pellicon^®
• parameter: 30 psi max. reverse press. exposure at 25 °C (for 24 hours); 4-6 L/min-m² recirculation rate; 40 psi max. transmembrane pressure at 4-50 °C; 6.9 bar max. inlet pressure (100 psi); 80 psi max. transmembrane pressure at 4-40 °C
• technique(s): buffer exchange: suitable; protein purification: suitable (concentration)
• H: 3.91 cm (1.54 in.)
• L: 20.6 cm (8.1 in.)
• W: 17.8 cm (7 in.)
• membrane area: 1.14 m²
• gravimetric extractables: ≤1500 mg/m²
• matrix: Biomax^® (Membrane)
• pore size: 30 kDa NMWCO
• pH: 1-14

Description

General description

Pellicon^® 3 filtration devices are advanced, high-performance cassettes ideal for today’s higher titer therapeutic antibodies as well as the more demanding filtration processes that require higher operating pressures, temperatures and caustic cleaning regimes.

The Pellicon^® 3 Cassette with Biomax^® Membrane is perfect for the filtration of monoclonal antibodies and solutions containing albumin, hormones, vaccines and growth factors.

This P3B030A10 Pellicon^® 3 ultrafiltration device features a pore size of 30 kDa NMWCO, a Biomax^® 30 membrane, and dimensions measuring 3.91 cm (H) x 17.8 cm (W) x 20.6 cm (L).

Features and Benefits

• Rugged & reliable – ideally suited for today′s more demanding filtration processes
• High performance – produces excellent resolution, yields and back-pressure resistance
• Optimum product recovery – thanks to proven membrane technology
• Void-free technology – leading-edge membranes resolve virtually any separation challenge
• Defect-free, superior adhesion – Ultracel^®uses composite membranes cast on a microporous substrate
• Automated manufacturing – delivers unbeatable performance, consistency and reliability
• Easy installation & care – simple to install and maintain

Other Notes

These products are manufactured in a facility which adheres to Good Manufacturing Practices.

Analysis Note

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Legal Information

BIOMAX is a registered trademark of Merck KGaA, Darmstadt, Germany

Pellicon is a registered trademark of Merck KGaA, Darmstadt, Germany

ULTRACEL is a registered trademark of Merck KGaA, Darmstadt, Germany

Safety Information

• Storage Class: 12 - Non Combustible Liquids
• wgk_germany: WGK 1
• flash_point_f: Not applicable
• flash_point_c: Not applicable