Skip to Content
MilliporeSigma
All Photos(1)

Documents

901971

Sigma-Aldrich

SunTronic® silver nanoparticle ink for inkjet printing

sintering temperature: 150-250 °C

Synonym(s):

Ag ink, Conductive ink, Silver ink, SunTronic®EMD5730

Sign Into View Organizational & Contract Pricing
All Photos(1)

About This Item

Empirical Formula (Hill Notation):
Ag
Molecular Weight:
107.87
UNSPSC Code:
12352200
NACRES:
NA.23

description

Sintering temperature: 150-250 °C for 10 – 60 min
Solid content: 40%
Volume Resistivity: 5 – 30 uΩ.cm

form

liquid

surface tension

28-31 dyn/cm

viscosity

11-13 cP (Brookfield)

storage temp.

2-8°C

Looking for similar products? Visit Product Comparison Guide

Related Categories

General description

SunTronic EMD5730 is formulated for inkjet printing of conductive traces onto a variety of substrates. EMD5730 is a solvent-based silver nanoparticle ink which demonstrates superior conductivity, stable jetting performance and adhesion to ITO coated glass.
EMD5730 can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.

Application

SunTronic® silver nanoparticle ink for inkjet printing (SunTronic® EMD5730) is a 3D additive printing technology that is used in a variety of applications such as flexible microsystems, and electronics. It is printed on a liquid crystal polymeric substrate for the formation of a low cost, adaptable tooling for effective deposition of a wide range of materials.

Caution

Printing
EMD5730 is supplied as ready-to-use solvent based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for solvent based inks, although full printhead compatibility will need to be verified in each case.
Sintering:
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 150-250°C depending on temperature tolerance of the substrate. Sintering time may range from 10-30 minutes. Electrical Resistance may be reduced with higher sintering temperature and/or longer sintering times.
Storage at a cool room temperature 10-15°C is recommended. Refrigeration can be used but agitated to assure proper dispersion is recommended.

Legal Information

SunTronic is a registered trademark of Sun Chemical, Inc.

signalword

Danger

Hazard Classifications

Acute Tox. 4 Oral - Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2 - Flam. Liq. 2 - STOT RE 2 Oral

target_organs

Kidney

Storage Class

3 - Flammable liquids

wgk_germany

WGK 3

flash_point_f

71.6 °F

flash_point_c

22 °C

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Customers Also Viewed

Slide 1 of 1

1 of 1

Sigma-Aldrich

Sigma-Aldrich

791873

Conductive silver printing ink, resistivity 5-6 Ω cm

Study of inkjet-printed serpentine structure on flexible substrates deformed over sculptured surfaces
Bower IA, et al.
Flexible and Printed Electronics (2020)
Additively Manufactured mm-Wave Multichip Modules With Fully Printed``Smart''Encapsulation Structures
He X, et al.
IEEE Transactions on Components, Hybrids, and Manufacturing (2019)

Articles

Advancements in the Fabrication of Integrated Organic Electronics

Professor Tokito and Professor Takeda share their new materials, device architecture design principles, and performance optimization protocols for printed and solution-processed, low-cost, highly flexible, organic electronic devices.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service