All Photos(1)



Carbon nanotube, single-walled, solvent-based conductive ink, SWCNT

1 mg/mL

SWNT Ink, SWCNT Ink, SWeNT V2V ink, Single-Walled Carbon Nanotube Ink, conductive ink, SWeNT VC101 ink


viscous liquid (black)

Quality Level


1 mg/mL

sheet resistance

<1000 Ω/sq, by 4-point probe on prepared (at 87.5% VLT (ohm/sq))


17.7 Pa.s(25 °C) (at 10 sec-1 shear rate)

storage temp.


Related Categories

General description

Single walled carbon nanotubes offer an alternative to metallic conductive inks. The nanotubes exhibit high conductivity, oxidation resistance. Carbon nanomaterial based conductive inks are used in printed and flexible electronics, thin film transistors, electrochemical sensors, supercapacitors and photovoltaics.


This solvent based conductive ink is primarily formulated for Screen Printing Transparent Conductors


25, 100 mL in glass bottle

Legal Information

Product of Chasm Advanced Materials, Inc.
Signis is a registered trademark of Chasm Advanced Materials, Inc.
CoMoCAT is a trademark of Chasm Advanced Materials, Inc.
CHASM is a trademark of Chasm Advanced Materials, Inc.

Signal Word


Hazard Classifications

Acute Tox. 4 Inhalation - Acute Tox. 4 Oral - Aquatic Acute 1 - Eye Dam. 1 - Flam. Liq. 2 - Skin Corr. 1A

Storage Class Code

3 - Flammable liquids

WGK Germany


Flash Point(F)

-2.2 °F - closed cup

Flash Point(C)

-19 °C - closed cup

Certificate of Analysis

Certificate of Origin


Graphene Inks for Printed Electronics

The emerging field of printed electronics requires a suite of functional materials for applications including flexible and large-area displays, radio frequency identification tags, portable energy harvesting and storage, biomedical and environmental sensor arrays,5,6 and logic circuits.

Boron Nitride Nanotubes: Properties, Synthesis and Applications

Boron nitride nanotubes (BNNT) are close structural analogs of carbon nanotubes (CNT), which are high aspect ratio nanotubular material, where carbon atoms are alternately substituted by nitrogen and boron atoms.

Organic Bioelectronic Materials and Devices for Bridging Biology and Traditional Electronics

Professor Rivnay (Northwestern University, USA) discusses using organic mixed conductors as an alternative to efficiently bridge the ionic world of biology with contemporary microelectronics.

3D Printable Conductive Nanocomposites of PLA and Multi-walled Carbon Nanotubes

A nanocomposite is typically defined as a mixture between a host material (e.g., polymer matrix) and nanofillers with at least one dimension of less than 100 nm.

See All

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service