182265

Sigma-Aldrich

Poly(methyl methacrylate)

Synonym(s):
PMMA, Poly(methacrylic acid methyl ester)
Linear Formula:
[CH2C(CH3)(CO2CH3)]n
CAS Number:
MDL number:
PubChem Substance ID:
NACRES:
NA.23

Quality Level

autoignition temp.

580 °F

transition temp

Tg (DSC) 105 °C (midpoint)

solubility

H2O: insoluble

density

1.200 g/cm3

InChI

1S/C5H9O2/c1-4(2)5(6)7-3/h1-3H3

InChI key

PMAMJWJDBDSDHV-UHFFFAOYSA-N

Looking for similar products? Visit Product Comparison Guide

General description

Poly (methyl methacrylate) (PMMA) is an amorphous transparent thermoplastic polymer. PMMA is recognized as an optical polymer based on its refractive index of 1.49. Hence, it is used in optical fibers.It finds uses in biological applications because of its low water absorption capability and biocompatible.The maximum moisture content of PMMA is 1.71% and SBF absorption is 1.96%.Simulated Body fluid test (SBF) is a method to characterize the in vitro bioactivity of ceramic materials, by immersing the materials in an aqueous SBF solution.

Application

PMMA/HA (Hydroxyapatite) composites have be used in biomedical applications such as dentistry, orthopedic retainers, and bone replacement. It has been used as substrate for graphene growth.
Some studies report its use as
PMMA-titania hybrid optical thins films
PMMA/polystryrene/clay nanocomposites
PMMA/polyurethane/carbon black nanocomposites for methanol fuel cells.

Packaging

25, 500 g in poly bottle
1 kg in poly bottle

storage_class_code

13 - Non Combustible Solids

WGK Germany

nwg

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Personal Protective Equipment

dust mask type N95 (US),Eyeshields,Gloves

Certificate of Analysis

Certificate of Origin

High-refractive-index thin films prepared from trialkoxysilane-capped poly (methyl methacrylate)-titania materials
Lee LH, et al.
Chemistry of Materials, 13(3), 1137-1142 (2001)
Jian-Chiun Liou et al.
Nanoscale research letters, 9(1), 1-1 (2014-01-02)
In this study, the Mo-electrode thin films were deposited by a two-stepped process, and the high-purity copper indium selenide-based powder (CuInSe2, CIS) was fabricated by hydrothermal process by Nanowin Technology Co. Ltd. From the X-ray pattern of the CIS precursor...
Poly (methyl methacrylate) and polystyrene/clay nanocomposites prepared by in-situ polymerization.
Zeng C and Lee LJ
Macromolecules, 34(12), 4098-4103 (2001)
Donghwa Lee et al.
Nanoscale, 5(17), 7750-7755 (2013-07-12)
A new AgNW-graphene hybrid transparent conducting electrode (TCE) was prepared by dry-transferring a chemical vapor deposition (CVD)-grown monolayer graphene onto a pristine AgNW TCE. The AgNW-graphene hybrid TCE exhibited excellent optical and electrical properties as well as mechanical flexibility. The...
Patrick M Honore et al.
ASAIO journal (American Society for Artificial Internal Organs : 1992), 59(2), 99-106 (2013-02-27)
In recent years, after all the attention has been focused on the dose for continuous renal replacement therapy (CRRT) in sepsis and systemic inflammation response syndrome (SIRS), the relatively negative results of all those studies did urge our expectations on...
Articles
Professor Aran (Claremont University, USA) thoroughly discusses the engineering of graphene based materials through careful functionalization of graphene oxide, a solution processable form of graphene.
Read More
Developed in the last several years, fluorescence quenching microscopy (FQM) has enabled rapid, inexpensive, and high-fidelity visualization of two-dimensional (2D) materials such as graphene-based sheets and MoS2.
Read More
A Review of Mesoporous TiO2 Thin Films
Read More

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service