12484-U

Metal Packed GC Column (fits Agilent, Configuration "A")

phase none, matrix 100/120 Molecular Sieve 5A support, L × O.D. × I.D. 6.0 ft (1.8 m) × 1/8 in. × 2.1 mm

• UNSPSC Code: 41115710
• NACRES: SB.54

Properties

• material: stainless steel column
• Quality Level: 100
• manufacturer/tradename: Agilent
• parameter: 0-400 °C temperature (isothermal or programmed)
• technique(s): gas chromatography (GC): suitable
• L × O.D. × I.D.: 6.0 ft (1.8 m) × 1/8 in. × 2.1 mm
• matrix: 100/120 Molecular Sieve 5A support
• matrix active group: none phase
• column type: packed GC
• compatibility: for use with Agilent Configuration A

Description

General description

Packed column made up of stainless steel are basically employed when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents.

An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column fits Agilent 5880, 5890, 6890, 7820, and 7890 (configuration A, on-column injection, all detectors except TCD).

Application

Molecular Sieve 5A support in stainless steel gas chromatographic column maybe used for the measurement of atmospheric nitrous oxide.

Safety Information

• pictograms: GHS08
• signalword: Warning
• hcodes: H373
• pcodes: P260 - P314 - P501
• Hazard Classifications: STOT RE 2 Inhalation
• target_organs: Lungs
• Storage Class: 13 - Non Combustible Solids
• wgk_germany: nwg
• flash_point_f: Not applicable
• flash_point_c: Not applicable