MTGR05010

Aervent^® 50 Capsule Filter

pore size 0.2 μm

• Synonim(y): Aervent^®-50 Filter Unit 0.2 µm hydrophobic 1/8 in. HB/HB, EPA Est. 041237-FRA-001
• Kod UNSPSC: 23151806
• eCl@ss: 32031690
• NACRES: NB.24

Właściwości

• Materiały: PTFE membrane; polypropylene ; polypropylene housing
• Poziom jakości: 400
• sterylność: non-sterile
• Kompatybilność ze sterylizacją: gamma compatible
• linia produktu: Aervent^®
• Właściwości: hydrophobic
• producent / nazwa handlowa: Aervent^®
• Parametry: 2.1 bar max. differential pressure at 25 °C; 4.1 bar max. inlet pressure (60 psi) at 25 °C
• metody: gas filtration: suitable
• Długość: 7.1 cm (2.8 in.)
• Szerokość: 2.4 in.
• Średnica: 6.2 cm (2.4 in.)
• powierzchnia filtracyjna: 19.6 cm²
• zanieczyszczenia: ≤0.5 EU/mL (LAL test, Aqueous extraction)
• substancje ekstrahujące się grawimetrycznie: ≤1.0 mg
• macierz: Aervent^®
• wielkość porów: 0.2 μm pore size
• punkt pęcherzykowania: ≥1100 mbar (16 psig), nitrogen with 60/40% IPA/water at 23 °C
• dopasowywanie: inlet/outlet hose for 4-9.5 mm I.D. latex tubing and Female Luer slip
• Warunki transportu: ambient

Opis

Opis ogólny

This Aervent^® hydrophobic Capsule filter contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter, with a 0.2 μm pore size and 19.6 cm² filtration area, is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane within MTGR05010 provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility. For traceability and easy identification, each Aervent-50 filter is hot stamped with its catalogue number and lot number. Each Aervent^® Capsule Filter is integrity tested during manufacture.

Zastosowanie

Typical Applications

• Sterile venting of vessels and carboys
• Autoclave vacuum break lines
• Low volume sterile filtration of non-aqueous fluids
• Small fermenter inlet and exhaust gas filtration

Komentarz do analizy

Gravimetric Extractables: in 70/30 % IPA/water

Inne uwagi

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informacje prawne

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.