MTGR65010

Aervent^® 50 Capsule Filter

pore size 0.2 μm

• Synonim(y): Aervent^®-50 Filter Unit 0.2 µm hydrophobic 1/8 in. NPTM-1/4 in. HB, EPA Est. 041237-FRA-001
• Kod UNSPSC: 23151806

Właściwości

• Materiały: PTFE membrane; polypropylene ; polypropylene housing
• Poziom jakości: 400
• sterylność: non-sterile
• Kompatybilność ze sterylizacją: gamma compatible
• linia produktu: Aervent^®
• Właściwości: hydrophobic
• producent / nazwa handlowa: Aervent^®
• Parametry: 2.1 bar max. differential pressure at 25 °C; 4.1 bar max. inlet pressure (60 psi) at 25 °C
• metody: gas filtration: suitable
• Długość: 5.3 cm (2.1 in.)
• Szerokość: 2.4 in.
• Średnica: 6.2 cm (2.4 in.)
• powierzchnia filtracyjna: 19.6 cm²
• zanieczyszczenia: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• substancje ekstrahujące się grawimetrycznie: ≤1.0 mg
• Matryca: Aervent^®
• wielkość porów: 0.2 μm pore size
• punkt pęcherzykowania: ≥1100 mbar (16 psig), nitrogen with 60/40% IPA/water at 23 °C
• dopasowywanie: (3 mm (1/8 in.) NPT Inlet and Outlet)

Opis

Opis ogólny

Prostak^™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore^® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.

This Prostak^™ microfiltration open-channel module features a Pore Size of 0.1 μm and a filtration area of 0.17 m². PSVVAG021 is available in a 2 stack, making it applicable for bench-top, pilot, and production scale systems.

The modules can be integrity tested and steam sterilized for 20 cycles.

Prostak^™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.

Zastosowanie

Typical Applications

• Sterile venting of vessels and carboys
• Autoclave vacuum break lines
• Low volume sterile filtration of non-aqueous fluids
• Small fermenter inlet and exhaust gas filtration

Uwaga dotycząca przygotowania

Sterilization Method
10 autoclave cycles of 30 min @ 130 °C; not in-line steam sterilizable

Komentarz do analizy

Bacterial Retention
Quantitative retention of 10⁷ CFU/cm²Brevundimonas diminuta (ATCC^® 19146) per ASTM F838-83 methodology

Gravimetric Extractables: in 70/30 % IPA/water

Inne uwagi

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informacje prawne

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

ATCC is a registered trademark of American Type Culture Collection

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Prostak is a trademark of Merck KGaA, Darmstadt, Germany

Ta strona może zawierać tekst przetłumaczony maszynowo.