MPGL10ZW1

Millipak^® Filter

Removes bacteria from pure water before entering the analyzer., For use with AFS^® systems

• Synonim(y): Millipak^® 100 Bacteria Filter
• Kod UNSPSC: 41104212
• eCl@ss: 33050190
• NACRES: JA.14

Właściwości

• Materiały: PVDF membrane
• Poziom jakości: 300
• sterylność: non-sterile
• Właściwości: hydrophilic
• opakowanie: pkg of 1 unit
• producent / nazwa handlowa: Millipak^®
• Długość: 13 cm (5.12 in.)
• śr. przyłącza doprowadzającego: 1/4 in.
• śr. przyłącza odprowadzającego: 1/4 in.
• zanieczyszczenia: <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• substancje ekstrahujące się grawimetrycznie: ≤2.5 mg/device
• Matryca: Durapore^®
• wielkość porów: 0.22 μm pore size
• dopasowywanie: NPT inlet connection; NPT outlet connection
• kompatybilność: for use with AFS^®
• Warunki transportu: ambient

Opis

Opis ogólny

Millipak^® membrane products are designed for routine filtration applications in the laboratory. Millipak^® filters are best-in-class proven products, utilized in lab water purification systems that provide particulate-free and bacteria-free purified water to benefit the stringent requirements for pure water.
Millipak^® 100 Bacteria Filter removes bacteria from pure water before entering the analyzer.

Zastosowanie

Provides bacteria-free and particulate-free water suitable for laboratory use, including clinical analyzers.
For use with AFS^® water purification systems.

Cechy i korzyści

• Hydrophilic Durapore^® PVDF membranes for high flow rates and throughput.
• Low protein binding membrane yields high sample recovery with minimal loss of valuable product ensuring high-value filtration.
• Reduces the risk of microbial contamination.
• Ideally suited for high value-added applications.
• Device Configuration: Capsule

Komponenty

0.22 μm Durapore^® filter membrane for bacteria removal

Inne uwagi

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganisms
• Mode of Action: Filtering
• Application: General laboratory analysis
• Intended Use: Water purification
• Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes. Refer to system equipment user guide section "Using the System" (available on USB key in the system box).
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Uwaga dotycząca przygotowania

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Komentarz do analizy

Bacterial Retention
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM^® F838 methodology.

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Informacje prawne

AFS is a registered trademark of Merck KGaA, Darmstadt, Germany

ASTM is a registered trademark of American Society for Testing and Materials

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany

Ta strona może zawierać tekst przetłumaczony maszynowo.