D00202S01

Clarigard^® Cartridge Filter

pore size 0.2 μm, cartridge nominal length 20 in. (50 cm), Code 0 (2-222; O-rings)

• Synonim(y): Clarigard Cartridge Filter 20 in. 0.2 µm Code 0 Silicone
• Kod UNSPSC: 23151806
• eCl@ss: 32031690

Właściwości

• Materiały: polypropylene ; silicone seal
• Poziom jakości: 400
• Właściwości: hydrophilic
• producent / nazwa handlowa: Clarigard^®; Clarigard^®
• Parametry: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• długość nominalna kartridża: 20 in. (50 cm)
• Średnica: 7.0 cm (2.75 in.)
• zanieczyszczenia: ≤0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• substancje ekstrahujące się grawimetrycznie: ≤20 mg
• wielkość porów: 0.2 μm nominal pore size; 0.2 μm pore size
• moc wejściowa: sample type liquid
• kod wkładu: Code 0 (2-222; O-rings)

Opis

Opis ogólny

Device Configuration: Cartridge

Uwaga dotycząca przygotowania

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Komentarz do analizy

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L

Inne uwagi

Directions for Use

• Organism Retention: 99.99% retention
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Bioburden reduction
• Instructions for Use: Please refer to the POLYGARD^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informacje prawne

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.