CHVE71HF

Millipore Express^® SHRP High Area, Cartridge

cartridge nominal length 10 in. (25 cm), filter diam. 2.7 in. (6.9 cm), Code 7

• Kod UNSPSC: 23151806

Właściwości

• Materiały: polyethersulfone device; polypropylene device; polypropylene support; rubber seal (fluorocarbon)
• Poziom jakości: 400
• zgodność regionalna: meets FDA 21 CFR 177-182 (all component materials)
• sterylność: non-sterile
• Kompatybilność ze sterylizacją: autoclavable compatible; steam-in-place compatible
• linia produktu: Millipore Express^®
• Właściwości: hydrophilic
• producent / nazwa handlowa: Millipore Express^®
• Parametry: ≤54.2 mL/min air diffusion at 3.45 bar (50 psig) (in water); 1700 mbar max. differential pressure (25 psi) at 80 °C (Forward ); 1700 mbar max. inlet pressure (25 psi) at 80 °C (Forward ); 2100 mbar max. differential pressure (30 psi) at 25 °C (Reverse); 2100 mbar max. inlet pressure (30 psi) at 25 °C (Reverse); 340 mbar max. differential pressure (5 psi) at 135 °C (Forward ); 340 mbar max. inlet pressure (5 psi) at 135 °C (Forward ); 69 mbar max. differential pressure (1 psi) at 135 °C (Reverse); 69 mbar max. inlet pressure (1 psi) at 135 °C (Reverse); 6900 mbar max. differential pressure (100 psi) at 25 °C (Forward ); 6900 mbar max. inlet pressure (100 psi) at 25 °C (Forward )
• metody: sterile filtration: suitable
• Długość: 10 in.
• Szerokość: 2.8 in.
• długość nominalna kartridża: 10 in. (25 cm)
• śr. filtra: 2.7 in. (6.9 cm)
• filter filtration area: 1.0 m²
• zanieczyszczenia: ≤0.25 EU/mL bacterial endotoxins (LAL test, aqueous extraction); <0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• macierz: Millipore Express^® SHR (w/Prefilter High Area)
• pore size: 0.5/0.1 μm pore size
• punkt pęcherzykowania: ≥2586 mbar (37.5 psig), nitrogen with 70/30% IPA/water
• kod wkładu: Code 7

Opis

Opis ogólny

Device Configuration: Cartridge
Cartridge Type: Liquid

Opakowanie

Double Easy-Open Bag

Uwaga dotycząca przygotowania

This product was manufactured with a MILLIPORE EXPRESS^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Komentarz do analizy

TOC/Conductivity: After sterilization and a controlled water flush of 20 L, samples exhibited <500 ppb TOC per USP 643 and <1.3 μS/cm per USP 645 at 25 °C.



Bacterial Retention: Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM^® F838 methodology.

Inne uwagi

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer wetting instructions of Filters with MILLIPORE EXPRESS^® Membrane user guide
• Storage Statement: Please refer Filters with MILLIPORE EXPRESS^® Membrane user guide
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Informacje prawne

ASTM is a registered trademark of American Society for Testing and Materials

MILLIPORE EXPRESS is a registered trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.