Przejdź do zawartości
Merck

685070

Sigma-Aldrich

F8T2

99.9%

Synonim(y):

Poly(9,9-dioctylfluorene-alt-bithiophene), Poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-bithiophene], Poly[[2,2′-bithiophene]-5,5′-diyl(9,9-dioctyl-9H-fluorene-2,7-diyl)]

Zaloguj sięWyświetlanie cen organizacyjnych i kontraktowych


About This Item

Wzór liniowy:
(C37H44S2)n(C8H9)2
Numer CAS:
Kod UNSPSC:
12352103
NACRES:
NA.23

Próba

99.9%

Formularz

powder

masa cząsteczkowa

average Mn >20,000

fluorescencja

λex 400 nm; λem 497 nm in chloroform (at Mn = 20,000)

właściwości półprzewodników

P-type (mobility=5×10−3 cm2/V·s)

Opis ogólny

F8T2 is a fluorenated semiconducting polymer which can be used as a hole transporting layer with mobility of 0.02cm2V-1s-1. It is highly stable in vacuum and UV based environment. Its liquid crystallinity allows it to form a self-ordered nanostructure on organic thin films.
Typically soluble in THF, Dichloromethane, or Tolune. (c = 1%, typical appearance may be clear to turbid).
Polymer is end-capped with 3,5-dimethylbenzene.

Zastosowanie

F8T2 can be majorly used in the fabrication of active layers for optoelectronics and energy based devices such as organic field effect transistors(OFETs), solar cells, light emitting diodes(LEDs) and electronic gas sensors.
Ta strona może zawierać tekst przetłumaczony maszynowo.

Kod klasy składowania

11 - Combustible Solids

Klasa zagrożenia wodnego (WGK)

WGK 3

Temperatura zapłonu (°F)

Not applicable

Temperatura zapłonu (°C)

Not applicable


Wybierz jedną z najnowszych wersji:

Certyfikaty analizy (CoA)

Lot/Batch Number

Nie widzisz odpowiedniej wersji?

Jeśli potrzebujesz konkretnej wersji, możesz wyszukać konkretny certyfikat według numeru partii lub serii.

Masz już ten produkt?

Dokumenty związane z niedawno zakupionymi produktami zostały zamieszczone w Bibliotece dokumentów.

Odwiedź Bibliotekę dokumentów

Structural ordering in F8T2 polyfluorene thin film transistors.
Organic Field Effect Transistors II, 5217, 35-43 (2003)
Controlling of spectral and optical parameters of the F8T2 liquid-crystalline polymer (LCP) by molarity for optoelectronic devices.
Gunduz B.
Optik, 126(23), 4566-4573 (2015)
Modulating the charge injection in organic field-effect transistors: fluorinated oligophenyl self-assembled monolayers for high work function electrodes.
Fenwick O, et al.
Journal of Material Chemistry C, 3(13), 3007-3015 (2015)
Photovoltaic properties and charge dynamics in nanophase-separated F8T2/PCBM blend films.
Yasuda T, et al.
J. Photopolym. Sci. Technol., 25(3), 271-276 (2012)
Morana, M.; Bret, G.; Brabec, C.
Applied Physics Letters, 87, 153511-153511 (2005)

Produkty

The development of high-performance conjugated organic molecules and polymers has received widespread attention in industrial and academic research.

Organic photovoltaics (OPVs) represent a low-cost, lightweight, and scalable alternative to conventional solar cells. While significant progress has been made in the development of conventional bulk heterojunction cells, new approaches are required to achieve the performance and stability necessary to enable commercially successful OPVs.

There is widespread demand for thin, lightweight, and flexible electronic devices such as displays, sensors, actuators, and radio-frequency identification tags (RFIDs). Flexibility is necessary for scalability, portability, and mechanical robustness.

Nasz zespół naukowców ma doświadczenie we wszystkich obszarach badań, w tym w naukach przyrodniczych, materiałoznawstwie, syntezie chemicznej, chromatografii, analityce i wielu innych dziedzinach.

Skontaktuj się z zespołem ds. pomocy technicznej