모든 사진(1)
About This Item
Linear Formula:
HOOC(CH2)4COOH
CAS Number:
Molecular Weight:
146.14
Beilstein:
1209788
EC Number:
MDL number:
UNSPSC 코드:
12352106
eCl@ss:
39021711
PubChem Substance ID:
NACRES:
NA.21
추천 제품
vapor density
5 (vs air)
Quality Level
vapor pressure
1 mmHg ( 159.5 °C)
제품 라인
BioXtra
분석
≥99.5% (HPLC)
autoignition temp.
788 °F
무기 잔류물
≤0.05% (as SO4)
손실
≤1% loss on drying, 110 °C
bp
265 °C/100 mmHg (lit.)
mp
151-154 °C (lit.)
151-154 °C
solubility
H2O: soluble 23 g/L at 25 °C
음이온 미량물
chloride (Cl-): ≤50 mg/kg
nitrate (NO3-): ≤30 mg/kg
sulfate (SO42-): ≤500 mg/kg
양이온 미량물
As: ≤3 mg/kg
Cu: ≤10 mg/kg
Fe: ≤5 mg/kg
Pb: ≤10 mg/kg
Zn: ≤10 mg/kg
SMILES string
OC(=O)CCCCC(O)=O
InChI
1S/C6H10O4/c7-5(8)3-1-2-4-6(9)10/h1-4H2,(H,7,8)(H,9,10)
InChI key
WNLRTRBMVRJNCN-UHFFFAOYSA-N
유사한 제품을 찾으십니까? 방문 제품 비교 안내
신호어
Danger
유해 및 위험 성명서
예방조치 성명서
Hazard Classifications
Eye Dam. 1
Storage Class Code
11 - Combustible Solids
WGK
WGK 1
Flash Point (°F)
384.8 °F - closed cup
Flash Point (°C)
196 °C - closed cup
개인 보호 장비
dust mask type N95 (US), Eyeshields, Gloves
이미 열람한 고객
J B J H van Duuren et al.
Biotechnology and bioengineering, 108(6), 1298-1306 (2011-02-18)
A limited life cycle assessment (LCA) was performed on a combined biological and chemical process for the production of adipic acid, which was compared to the traditional petrochemical process. The LCA comprises the biological conversion of the aromatic feedstocks benzoic
Holger Noack et al.
Inorganic chemistry, 50(4), 1194-1202 (2011-01-28)
Adipic acid is a key compound in the chemical industry, where it is mainly used in the production of polymers. The conventional process of its generation requires vast amounts of energy and, moreover, produces environmentally deleterious substances. Thus, there is
H V Pawar et al.
Colloids and surfaces. B, Biointerfaces, 102, 102-110 (2012-09-26)
Streptomycin (STP) and diclofenac (DLF) loaded film dressings were prepared by blending Polyox(®) (POL) with four hydrophilic polymers [hydroxypropylmethylcellulose (HPMC), carrageenan (CAR), sodium alginate (SA) or chitosan (CS)] using glycerol (GLY) as plasticiser. The films were characterised by scanning electron
M A Shirai et al.
Carbohydrate polymers, 92(1), 19-22 (2012-12-12)
Biodegradable films were produced from blends contained a high amount of thermoplastic starch (TPS) and poly(lactic acid) (PLA) plasticized with different adipate or citrate esters. It was not possible to obtain pellets for the production of films using only glycerol
Krzysztof J Paluch et al.
Journal of pharmaceutical sciences, 100(8), 3268-3283 (2011-04-08)
The production of salt or cocrystalline forms is a common approach to alter the physicochemical properties of pharmaceutical compounds. The goal of this work was to evaluate the impact of anion choice (succinate, adipate, and sulfate) on the physicochemical characteristics
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.