SK2RB30A1

Prostak^™ MFモジュール

pore size 200 kDa

• 別名: Prostak^™ MF Module 200 kDa 20 stack 1.7 m ²
• UNSPSCコード: 23151806
• eCl@ss: 32031623

特性

• 物質: PVDF ; silicone gasket
• 品質水準: 400
• 特徴: hydrophobic
• メーカー／製品名: Prostak^™
• パラメーター: 2.1 bar max. transmembrane pressure (30 psi) at 50-80 °C; 4.1 bar max. inlet pressure (60 psi) at 50-80 °C; 4.1 bar max. transmembrane pressure (60 psi) at 50 °C; 5.5 bar max. inlet pressure (80 psi) at 50 °C
• dilution: (concentration and clarification)
• H: 12.4 cm (4.9 in.)
• L: 38.9 cm (15.3 in.)
• W: 19.8 cm (7.8 in.)
• device size: , 20 stack
• ろ過面積: 1.7 m²
• membrane nominal area: 1.7
• 重量: 6.2 kg (13.7 lb)
• マトリックス: Durapore^®
• ポアサイズ: 200 kDa NMWCO; 200 kDa pore size
• pH: 1-13(short duration); 2-12(continuous)

詳細

詳細

Prostak^™ MF Module are a tangential flow filtration device in a stacked plate configuration with Type V screen open feed channel. A microporous membrane, Durapore^® polyvinylidene fluoride (PVDF), is bonded on both sides of each plate. The plates are then stacked in parallel forming stacks.

This Prostak^™ microfiltration open-channel module features a Pore Size of 200 kDa and a filtration area of 1.7 m². SK2RB30A1 is available in a 20 stack, making it applicable for bench-top, pilot, and production scale systems.

The modules can be integrity tested and steam sterilized for 20 cycles.

Prostak^™ MF modules must be used with a support holder, which controls deflection and provides sanitary fittings for connection to external piping. Sanitary gaskets supplied with the module provide a leak-free connection between the module(s) and the holder.

アプリケーション

Typical Applications
Prostak^™ microfiltration is used for separations where viscosity and suspended solids levels of the feed stream require an open feed channel. They are typically used in perfusion applications or in the clarification/harvest of:

• Mammalian, bacterial and mycelial cell suspensions
• Emulsions and colloidal suspension
• Viruses, proteins and other bio-organic macromolecular solutions
• Polysaccharides and other high viscosity solutions
• Yeast, algae, and other high solids suspensions
• Protein precipitate
• Vaccines

特徴および利点

Type V screen open feed channel

その他情報

これらの製品はFDAの定めたGMP準拠の製造工場で製造されています。

Prefiltration Rquirements: 150 µm

法的情報

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Prostak is a trademark of Merck KGaA, Darmstadt, Germany

安全性情報

• 保管分類コード: 10 - Combustible liquids
• WGK: WGK 2