KN1HA3TTT1

Opticap^® XLT30 Polygard^®

inlet connection diam. 1.5 in., pore size 10.0 μm, cartridge nominal length 30 in. (75 cm)

• 別名: Polygard -CN Opticap XLT 30 in. 10.0 μm 1.5 in. TC/TC
• UNSPSCコード: 23151806
• eCl@ss: 32031690

特性

• 物質: polypropylene
• 品質水準: 400
• 法規制遵守: meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
• メーカー／製品名: Opticap^®
• パラメーター: 25 °C max. inlet temp.; 80 psig max. inlet pressure
• カートリッジの長さ（公称）: 30 in. (75 cm)
• 入口接続部直径: 1.5 in.
• 出口接続部直径: 1.5 in.
• 不純物: <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• 重量分析抽出物: ≤165 mg/capsule
• マトリックス: Polygard^®-CN
• ポアサイズ: 10.0 μm nominal pore size; 10.0 μm pore size
• 入力: sample type liquid
• フィッティング: inlet sanitary flange; outlet sanitary flange

詳細

詳細

Device Configuration: カプセル

T-line/Gauge Port: T-line

その他情報

これらの製品はFDAの定めたGMP準拠の製造工場で製造されています。

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer installation section of OPTICAP^® XL Capsules and OPTICAP^® XLT Capsules user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

アナリシスノート

Gravimetric Extractables: after 24 hours in water at controlled room temperature

法的情報

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany