Passa al contenuto
Merck
Tutte le immagini(3)

Documenti fondamentali

67579

Millipore

O157 Millichrome plus Agar

suitable for microbiology

Sinonimo/i:

E. coli O157 chromogenic agar

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali


About This Item

Codice UNSPSC:
41161501
NACRES:
NA.74

agenzia

EP
JP
USP

Livello qualitativo

Compatibilità con la sterilizzazione

dry heat compatible

Forma fisica

dry powder

Durata

limited shelf life, expiry date on the label

Composizione

Agar, 15.0 g/L
Chromogenic Mix, 1.2 g/L
Chromogenic mix, 1.2 g/L
Peptone and yeast
extract, 13.0 g/L

Peptone & Yeast Extract, 13.0 g/L

Produttore/marchio commerciale

MilliChrome

tecniche

microbiological culture: suitable

pH finale

6.9±0.2 (25 °C)

Solubilità

deionized water: 29.2 g/L

applicazioni

food and beverages
microbiology

Condizioni di spedizione

ambient

Temperatura di conservazione

15-25°C

Compatibilità

selective for bacteria: Escherichia coli O157

Categorie correlate

Descrizione generale

O157 Millichrome plus Agar is a selective media for the isolation and detection of E. coli O157. The distinguishing feature of these media is the inclusion of a chromogenic substrate mix that produces visible color changes upon enzymatic activity of E. coli O157. Millichrome chromogenic media is a specialized type of culture medium used to detect and isolate specific groups of bacteria based on their ability to produce enzymes with chromogenic substrates. For optimal growth, peptone and yeast extract provide nitrogenous nutrients and essential growth factors. Sodium chloride is crucial for maintaining osmotic balance. The chromogenic mix contains substrates that change color when characteristic enzymes cleave them, allowing for easy differentiation.To create a more selective and specific medium, it is recommended to include a potassium tellurite supplement. If there is expected to be a high load of Proteus spp., cefixime can be added. Similarly, a high load of Pseudomonas and/or Aeromonas can be inhibited by including cefsulodin. Agar serves as the solidifying agent.

Applicazioni

O157 Millichrome plus Agar Base is a selective chromogenic culture medium intended for use in the qualitative direct detection, differentiation and presumptive identification of pathogenic biotypes of E. coli O157 from various samples.

Nota sulla preparazione

Step 1 (Preparation)
  • Disperse slowly 29.2 g of powder base in 1 L of purified water.
  • Stir until agar is well thickened.
  • Heat and bring to boil (100 °C) while swirling or stirring regularly.
DO NOT HEAT TO MORE THAN 100 °C. DO NOT AUTOCLAVE AT 121 °C.
Warning: If using an autoclave, do so without pressure.

Advice 1: For the 100 °C heating step, mixture may also be brought to a boil in a microwave oven: after initial boiling, remove from oven, stir gently, then return to oven for short repeated bursts of heating until complete fusion of the agar grains has taken place (large bubbles replacing foam).
Advice 2: if a more selective, and more specific, medium is needed, add a solution of Potassium Tellurite to obtain a final concentration of 2.5 mg/L at 45-50 °C.
Advice 3: in case of product samples containing a high load of Proteus, Cefixime can be added at 0.025 mg/L at 45-50 °C.
Advice 4 : in case of product samples containing a high load of Pseudomonas and/or Aeromonas, Cefsulodin can be added at 5 mg/L at 45-50 °C.

Step 2 (Pouring plates)
  • Cool in a water bath at 45-50 °C, swirling or stirring gently.
  • Pour into sterile Petri dishes.
  • Let it solidify and dry.

Stoccaggio e stabilità

Store prepared media below 8°C, protected from direct light (max. 1 month).Store dehydrated powder, in a dry place, in tightly sealed containers at 2-25°C.

Risultati analitici

The E. coli O157 is detected by a characteristic mauve color after only 24 h of incubation at an optimal growth temperature of 37°C, while most other E. coli form blue color colonies after incubation at the same temperature

Note legali

MilliChrome is a trademark of Merck KGaA, Darmstadt, Germany

Supplemento

N° Catalogo
Descrizione
Determinazione del prezzo

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 3


Scegli una delle versioni più recenti:

Certificati d'analisi (COA)

Lot/Batch Number

Non trovi la versione di tuo interesse?

Se hai bisogno di una versione specifica, puoi cercare il certificato tramite il numero di lotto.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.