Passa al contenuto
Merck
  • Application of electro-enhanced solid phase microextraction combined with gas chromatography-mass spectrometry for the determination of tricyclic antidepressants in environmental water samples.

Application of electro-enhanced solid phase microextraction combined with gas chromatography-mass spectrometry for the determination of tricyclic antidepressants in environmental water samples.

Journal of chromatography. A (2014-05-28)
Ruyi Xu, Hian Kee Lee
ABSTRACT

A fast and efficient method for the determination of tricyclic antidepressants using electro-enhanced solid phase microextraction (SPME) coupled to gas chromatography-mass spectrometry (GC-MS) has been developed. One advantage of this approach is that the mass transfer of target analytes from the sample solution to an SPME fiber can be accelerated by the electrical field, improving extraction selectivity and efficiency. In the present work, the target analytes extracted to the SPME fiber were thermally desorbed in the GC injection port after extraction. Under the optimized extraction conditions, the developed method exhibited low limits of detection (between 0.079 and 0.296μg/L) and good linearity over the concentration range of between 1 and 500μg/L with coefficients of determination (r(2)) of between 0.993 and 0.999. The relative standard deviations were lower than 9.2% for all analytes. The proposed method was applied to extract tricyclic antidepressants in environmental water samples.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Sodio idrossido, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Idrossido di sodio, 50% in H2O
Sigma-Aldrich
Idrossido di sodio, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Idrossido di sodio, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodio idrossido, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Sodio idrossido, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, powder
Sigma-Aldrich
Sodio idrossido, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Divinylbenzene, technical grade, 80%
Sigma-Aldrich
Sodio idrossido, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Idrossido di sodio, 5.0 M
Sigma-Aldrich
Sodio idrossido, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Sodio idrossido, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Sodio idrossido, reagent grade, 97%, flakes
Supelco
Idrossido di sodio, 49-51% in water, eluent for IC
Supelco
Idrossido di sodio, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC