Passa al contenuto
MilliporeSigma
  • Ultra-preconcentration and determination of selected pharmaceutical and personal care products in different water matrices by solid-phase extraction combined with dispersive liquid-liquid microextraction prior to ultra high pressure liquid chromatography tandem mass spectrometry analysis.

Ultra-preconcentration and determination of selected pharmaceutical and personal care products in different water matrices by solid-phase extraction combined with dispersive liquid-liquid microextraction prior to ultra high pressure liquid chromatography tandem mass spectrometry analysis.

Journal of chromatography. A (2014-06-19)
Rita Celano, Anna Lisa Piccinelli, Luca Campone, Luca Rastrelli
ABSTRACT

Pharmaceutical and personal care products (PPCPs) are one of the most important classes of emerging contaminants. The potential of ecological and environmental impacts associated with PPCPs are of particular concern because they continually penetrate the aquatic environment. This work describes a novel ultra-preconcentration technique for the rapid and highly sensitive analysis of selected PPCPs in environmental water matrices at ppt levels. Selected PPCPs were rapidly extracted and concentrated from large volumes of aqueous solutions (500 and 250mL) by solid-phase extraction combined with dispersive liquid-liquid microextraction (SPE-DLLME) and then analyzed using UHPLC-MS/MS. Experimental parameters were carefully investigated and optimized to achieve the best SPE-DLLME efficiency and higher enrichment factors. The best results were obtained using the ternary mixture acetonitrile/methanol/dichloromethane 3:3:4, v/v/v, both as SPE eluent and DLLME extractant/dispersive mixture. DLLME aqueous solution (5% NaCl, 10mgL(-1) TBAB) was also modified to improve the extraction efficiency of more hydrophilic PPCPs. Under the optimal conditions, an exhaustive extraction for most of the investigated analytes (recoveries >70%), with a precision (RSD <10%) and very high enrichment factors were attained for different aqueous matrices (drinking, sea, river and wastewater). Method detection and quantification limits were at very low ppt levels and below 1 and 3ngL(-1), respectively, for 15 of selected PPCPs. The proposed analytical procedure offers numerous advantages such as the simplicity of operation, rapidity, a high enrichment factor and sensitivity. So it is suitable for monitoring and studies of occurrence of PPCPs in different environmental compartments.

MATERIALI
N° Catalogo
Marchio
Descrizione del prodotto

Sigma-Aldrich
Acetonitrile, suitable for HPLC, gradient grade, ≥99.9%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Metanolo, suitable for HPLC, ≥99.9%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Metanolo, ACS reagent, ≥99.8%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Diclorometano, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Diclorometano, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Acetonitrile, anhydrous, 99.8%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Acetonitrile, HPLC Plus, ≥99.9%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Diclorometano, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Metanolo, anhydrous, 99.8%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Supelco
Ammonio acetato, LiChropur, eluent additive for LC-MS
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Cloroformio, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Sodio cloruro, for molecular biology, DNase, RNase, and protease, none detected, ≥99% (titration)
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Diclorometano, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Cloroformio, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Cloroformio, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Metanolo, HPLC Plus, ≥99.9%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Metanolo, suitable for HPLC, gradient grade, ≥99.9%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Sodio cloruro, 5 M in H2O, BioReagent, for molecular biology, suitable for cell culture
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Sodio cloruro, BioXtra, ≥99.5% (AT)
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Acetonitrile, ACS reagent, ≥99.5%
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità
Sigma-Aldrich
Sodio cloruro, 0.9% in water, BioXtra, suitable for cell culture
SKU
Taglio della confezione
Disponibilità
Prezzo
Quantità