84192

Micro particle size standard based on polystyrene monodisperse

analytical standard, size: 8.0 μm

• Sinonimo/i: Monodisperse polystyrene latex particles (8 μm), monodisperse polystyrene microbeads (8 μm), monodisperse polystyrene microspheres (8 μm), polystyrene monodisperse microparticles (8 μm), Size standards
• Numero MDL: MFCD00243243
• Codice UNSPSC: 41116107
• NACRES: NA.24

Proprietà

• Grado: analytical standard
• Livello qualitativo: 100
• Forma fisica: aqueous suspension; particles
• Crosslinking: 20 % cross-linked
• Concentrazione: 2% (solids)
• Dimensione particelle: 8.0 μm std dev <0.1 μm, coeff var <1.5%
• applicazioni: glass & ceramic; industrial qc; pharmaceutical
• Formato: neat
• Temperatura di conservazione: 2-8°C

Descrizione

Descrizione generale

Monodisperse polystyrene based micro particles (size: 8.0 μm) are a particle size standard, ideal to determine the particle size distribution (PSD) of test samples.

Applicazioni

Intended for use in validation and monitoring of the performance of particle sizing instruments.
It′s also used to:

• standardize methods of size-dependent chromatographic separations.
• characterize electrical impedance spectroscopy (EIS) performance of microfluidic device by size measurement.

Caratteristiche e vantaggi

• suitable for routine instrument calibration checks and corrections
• available in 5 mL pack size as a neat sample

Risultati analitici

For every lot exact values of particle size and standard deviation are determined with an accuracy of 0.001 μm. The size determination of these particles follows procedures described by National Institute of Standards and Technology (NIST, USA) respectively by the Community Bureau of Reference (BCR), esp.:

• Transmission electron microscopy (TEM)
• Scanning electron microscope
• Light microscopy
• Coulter^™ counter with MDF-system

Calibration of equipment is carried out with NIST-respectively BCR-particle size standards.

Note legali

Coulter is a trademark of Beckman Coulter, Inc.

Informazioni sulla sicurezza

• Codice della classe di stoccaggio: 10 - Combustible liquids
• Classe di pericolosità dell'acqua (WGK): WGK 3
• Punto d’infiammabilità (°F): 410.0 °F
• Punto d’infiammabilità (°C): 210 °C
• Dispositivi di protezione individuale: Eyeshields, Gloves