MMPPLUVHP
Milliflex Oasis® VHP resistant filtration pump with no power supply
The Milliflex Oasis®VHP resistant vacuum pump is suitable for use in isolators. The pump is VaporHydrogen Peroxide (VHP) resistant and compatible, suitable for sterility testing
Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
About This Item
Codice UNSPSC:
41116129
NACRES:
NB.75
Prodotti consigliati
Confezionamento
pkg of 1 unit
Produttore/marchio commerciale
Milliflex Oasis®
tecniche
Rapid Sterility Testing: suitable
applicazioni
bioburden testing
pharmaceutical
sterility testing
Compatibilità
for use with Milliflex Oasis® Systems standard for VHP
Condizioni di spedizione
ambient
Descrizione generale
The compact Milliflex Oasis® VHP resistant pump streamlines filtration steps during testing to accelerate and ease the sample preparation. When used with convenient Milliflex Oasis® filtration funnels, the pump and Milliflex Oasis® units comprise an integrated solution for delivering reliable and accurate results. The pump′s small footprint suits tight workspaces and its low profile allow easy access and usage in isolators. The housing and the external parts are VHP resistant.
Specificità
Frame Stainless steel316 L
Filtration heads Two per pump, Stainless steel, silicone, rubbergasketsNote: The pump head including all its components can be autoclaved at 121 °C for 15 minutes OR at 134 °C for 5 minutes.
Pump dimensions
Height 90 mm (3.5in.)
Width 230 mm (9.0in.)
Depth 310 mm (12.2in.)
Filtration support height 70 mm (2.8 in.)
Weight with filtration heads 3.4 kg (7.5 lb)
Power supply 100V–240V;50/60Hz — One set can be used for up to two pumps
Filtration heads Two per pump, Stainless steel, silicone, rubbergasketsNote: The pump head including all its components can be autoclaved at 121 °C for 15 minutes OR at 134 °C for 5 minutes.
Pump dimensions
Height 90 mm (3.5in.)
Width 230 mm (9.0in.)
Depth 310 mm (12.2in.)
Filtration support height 70 mm (2.8 in.)
Weight with filtration heads 3.4 kg (7.5 lb)
Power supply 100V–240V;50/60Hz — One set can be used for up to two pumps
Applicazioni
The Milliflex Oasis® VHP resistant pump is designed to perform filtrations of samples inside an isolator. It is suitable for rapid sterility testing in combination with the Milliflex® Rapid System 2.0.
Caratteristiche e vantaggi
- Streamlines filtration steps
- Compatible with the isolator environment and VHP decontamination
- Compatible with the Milliflex® Rapid System 2.0 to perform rapid sterility testing in a clean environment (isolator)
Altre note
Easy set-up
Low height - 90 mm (3.5 in.)
Cross-contamination prevention
Scalability: Connect up to 2 pumps and start up to 4 simultaneous filtrations with a single push of the button
- Quick connections for power and drain tubing
- No calibration needed
Low height - 90 mm (3.5 in.)
Cross-contamination prevention
- Check valve situated in the removable filtration head prevents potential contamination
- Accessible key parts of the head for easy cleaning
Scalability: Connect up to 2 pumps and start up to 4 simultaneous filtrations with a single push of the button
Note legali
MILLIFLEX is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIFLEX OASIS is a registered trademark of Merck KGaA, Darmstadt, Germany
Prodotti correlati
Certificati d'analisi (COA)
Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.
Possiedi già questo prodotto?
I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.
Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..
Contatta l'Assistenza Tecnica.