1.51450

Chromolith^® RP-18 endcapped

L × I.D.50 mm x 4.6 mm HPLC column

• Sinonimo/i: Chromolith^® SpeedROD RP-18 endcapped 50-4.6 HPLC column
• Codice UNSPSC: 41115709

Proprietà

• Materiali: PEEK column
• Livello qualitativo: 100
• agenzia: suitable for USP L1
• Nome Commerciale: Chromolith^®
• Caratteristiche: endcapped
• Confezionamento: 1 ea of
• Grado di funzionalizzazione: 18% Carbon loading
• Parametri: 200 bar pressure; 45 °C max. temp.
• tecniche: HPLC: suitable; LC/MS: suitable; mass spectrometry (MS): suitable (High)
• Lungh. × diam. int. colonna: 5 cm × 4.6 mm
• Matrice: monolithic silica
• Gruppo funzionale matrice: C18 bonding phase
• Dimensione pori: 13 nm mesoporosity; 2 μm macroporosity
• operating pH range: 2-7.5
• Tecnica di separazione: reversed phase
• Temperatura di conservazione: no temp limit

Descrizione

Descrizione generale

Chromolith^® columns are made of monolithic silica with a characteristic bimodal pore structure.

Chromolith^® SpeedROD RP-18 endcapped columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith^® SpeedROD RP-18 endcapped columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith^® SpeedROD RP-18 endcapped columns are perfectly suitable for LC-MS applications.
The column dimension of 50 mm length and 4.6 mm I.D. is the best choice for fast separations on any HPLC System.

The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity

The recommended Guard-columns are:
Chromolith^® RP-18 endcapped 5-4.6 guard cartridges (3 pieces) [1.51452] with the Chromolith^® Guard Cartridge Holder 5 mm x 4.6 mm [1.52032]
Or
Chromolith^® RP-18 endcapped 10-4.6 guard cartridges (3 pieces) [1.51451]
Guard Cartridge Holder 10 mm x 4.6 mm [1.52033]
The Chromolith^® column coupler can be used to significantly increase the separation efficiency of Chromolith^® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]

Need more efficiency?
Chromolith^® HighResolution RP-18 endcapped 50-4.6 HPLC columns [1.52021] provide a column efficiency exceeding 140,000 plates/meter.

Learn more:
Brochure: Race through your Separations on Any System. Chromolith^® Monolithic Silica HPLC Columns

All Supelco HPLC Columns, including monolithic Chromolith^® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument

Risultati analitici

Carbon content: 17.0 - 18.6 %
Pressure: ≤ 15 bar
stability testing: passes test
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 80000
Capacity factor (Anthracene): 3.6 - 4.6
Tailing (USP): 0.90 - 1.55 %
Selectivity
separation factor (anthracene/progesterone): 1.95 - 2.35

Note legali

Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany