Passa al contenuto
Merck
Tutte le immagini(1)

Key Documents

Altri documenti

753955

Sigma-Aldrich

ICBA

99% (HPLC)

Sinonimo/i:

1′,1′′,4′,4′′-Tetrahydro-di[1,4]methanonaphthaleno[1,2:2′,3′,56,60:2′′,3′′][5,6]fullerene-C60, C60 derivative, indene-C60 bisadduct

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(1)

About This Item

Formula empirica (notazione di Hill):
C78H16
Numero CAS:
1207461-57-1
Peso molecolare:
952.96
Codice UNSPSC:
12352103
NACRES:
NA.23

Saggio

99% (HPLC)

Forma fisica

solid

Perdita

0.5 wt. % TGA, 235 °C

Punto di fusione

253-260 °C

Energia dell’orbitale

LUMO 3.67 eV (CV)

Prestazioni di un dispositivo OPV

ITO/PEDOT:PSS/P3HT: ICBA (1:1)/Al

  • Short-circuit current density (Jsc): 10.82 mA/cm2
  • Open-circuit voltage (Voc): 0.78 V
  • Fill Factor (FF): 0.56
  • Power Conversion Efficiency (PCE): 4.65 %

ITO/PEDOT:PSS/P3HT:ICBA(1.5:1)/LiF/Al
  • Short-circuit current density (Jsc): 10.53 mA/cm2
  • Open-circuit voltage (Voc): 0.83 V
  • Fill Factor (FF): 0.60
  • Power Conversion Efficiency (PCE): 5.26 %

Cerchi prodotti simili? Visita Guida al confronto tra prodotti

Descrizione generale

ICBA is a C60 derivative that can be synthesized from C60 and indene. It is an acceptor material with shallow lowest occupied molecular orbital(LUMO) which can be used to enhance the performance of polymeric solar cells(PSCs).
The performance of indene-C60 bisadduct (ICBA) as organic solar cell (OSC) has been described in a study. Simple preparation and high solubility inorganic solvents renders ICBA as an efficient substitute to [6,6]-phenyl-C61 butyric acid methyl ester (PCBM).

Applicazioni

A ternary bulk heterojunction system (BHJ) may be fabricated with ICBA low band gap polymer, for IR sensitized organic solar cells. 1-3ICBA/thiazolo-thiazolo donor polymer blend may be used to enhance the charge generation in BHJ solar cells.
ICBA can be used with poly(3-hexylthiophene)(P3HT) as an active layer which can be used in the fabrication of organic solar cells(OSCs).ICBA in combination with thiazolo-thiazolo can be used as a donor. It can be blended with PCBM for photovoltaic based application.

Pittogrammi

Exclamation mark
GHS07

Avvertenze

Warning

Indicazioni di pericolo

H315,H319,H335

Classi di pericolo

Eye Irrit. 2 - Skin Irrit. 2 - STOT SE 3

Organi bersaglio

Respiratory system

Codice della classe di stoccaggio

11 - Combustible Solids

Classe di pericolosità dell'acqua (WGK)

WGK 3

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

Temperature dependence of P3HT: ICBA polymer solar cells.
2017 International Conference on Numerical Simulation of Optoelectronic Devices, 133-134 (2017)
Photo-physics of PTB7, PCBM and ICBA based ternary solar cells.
Sharma R, et al.
Organic Electronics, 34(4), 111-117 (2016)
Comparative study of spectral and morphological properties of blends of P3HT with PCBM and ICBA.
Lin YH, et al.
Organic Electronics, 13(11), 2333-2341 (2012)

IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells
Ameri T, et al.
Energy & Environmental Science, 6 (2013)
Optimization of the structural configuration of ICBA/P3HT photovoltaic cells.
Nemnes GA, et al.
Applied Surface Science, 424(4), 264-268 (2017)
Visualizza tutti i documenti correlati

Articoli

Optoelectronic Devices Based on Diketopyrrolopyrrole (DPP)-containing Conjugated Small Molecules

Optoelectronic Devices Based on Diketopyrrolopyrrole (DPP)-containing Conjugated Small Molecules

Polymer-Sorted Semiconducting Carbon Nanotubes for Transistors and Solar Cells

Single-walled carbon nanotubes (SWCNTs) are promising materials for use in the active channel of field-effect transistors (FETs), photoabsorbing layers of solar cells and photodetectors because of their ultrafast charge transport mobility.

Soluble Pentacene Precursors

Fabrication procedure of organic field effect transistor device using a soluble pentacene precursor.

Development of Small Molecule Donors for Solution-Processed Organic Solar Cells

Solution-processed organic photovoltaic devices (OPVs) have emerged as a promising clean energy generating technology due to their ease of fabrication, potential to enable low-cost manufacturing via printing or coating techniques, and ability to be incorporated onto light weight, flexible substrates.

Vedi tutto

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.